Isuzu I280 Workshop Manuals and Repair Manuals
Every Manual available online - found by our community and shared for FREE. Enjoy!
Isuzu I280
The Isuzu i-280 is mid-size pickup truck line wis launched at the 2005 New York Internaitional Auto Show. The i-Series replaces the Isuzu Hombre, which haes been oot o production syne 2000. Like the Hombre, the i-Series shares its platform wi the General Motors mid-size pickups. It is built at the same plant in Shreveport, Louisiana which produces the Chevrolet Colorado an GMC Canyon, which wur in turn developed off the cab an chassis o the Thai-built Isuzu D-Max bi GM, Isuzu, an GM do Brasil. i-Series sales hae been poor thus far, wi juist 1,377 sold frae the start o production through Februar 2006 accordin tae Automotive News. As part o Isuzu's withdrawal frae the Unitit States market efter the 2009 model year, the i-Series wis be discontinued, replaced bi the relatit Hummer H3T for GM's Hummer brand.
Isuzu I280 FAQ's
How do I check the brake fluid level in my Isuzu I280?
To check the brake fluid level in your Isuzu I280, locate the brake fluid reservoir under the hood. The reservoir is typically translucent and has "MIN" and "MAX" markings on the side. Ensure the vehicle is parked on a level surface, remove the cap, and visually inspect the fluid level. It should be between the "MIN" and "MAX" markings. If it is below the "MIN" marking, it is recommended to add brake fluid of the specified type to the reservoir.
How do I check the coolant level in my Isuzu I280?
To check the coolant level in your Isuzu I280, ensure the engine is cool and the vehicle is parked on a level surface. Locate the coolant reservoir, usually a translucent plastic tank with "MAX" and "MIN" markings on the side. Visually inspect the coolant level, which should be between the "MAX" and "MIN" markings. If it is below the "MIN" marking, it is recommended to add a mixture of coolant and distilled water to bring it up to the appropriate level.
How do I jump-start my Isuzu I280?
To jump-start your Isuzu I280, start by positioning another vehicle with a charged battery close to yours. Connect one end of the positive (red) jumper cable to the positive terminal of the dead battery and the other end to the positive terminal of the charged battery. Then, connect one end of the negative (black) jumper cable to the negative terminal of the charged battery and the other end to a metal part of your vehicle away from the battery. Start the vehicle with the charged battery and let it run for a few minutes, then attempt to start your Isuzu I280.
How do I replace a fuse in my Isuzu I280?
To replace a fuse in your Isuzu I280, start by locating the fuse box, which is typically located under the dashboard or in the engine compartment. Open the fuse box and locate the fuse corresponding to the component or circuit that needs replacement. Using a fuse puller or a pair of needle-nose pliers, gently pull out the old fuse and replace it with a new one of the same amperage rating. Make sure the new fuse is securely seated in the fuse box, then close the fuse box cover.
How do I replace a headlight bulb on my Isuzu I280?
To replace a headlight bulb on your Isuzu I280, start by opening the hood and locating the back of the headlight assembly. Twist the bulb socket counterclockwise to remove it from the assembly, then pull out the old bulb. Insert the new bulb into the socket, making sure it is secure, and then reinsert the socket into the headlight assembly, twisting it clockwise to lock it in place. Finally, test the new bulb to ensure it is functioning properly.
How do I replace the cabin air filter in my Isuzu I280?
To replace the cabin air filter in your Isuzu I280, locate the filter housing, which is typically located behind the glove compartment or under the dashboard. Open the housing by removing the retaining clips or screws, then take out the old filter. Insert the new filter according to the direction indicated on the filter itself, and then securely close the housing. Regularly replacing the cabin air filter helps to ensure clean air circulation inside the vehicle and improves the effectiveness of the HVAC system.
How do I replace the windshield wipers on my Isuzu I280?
To replace the windshield wipers on your Isuzu I280, lift the wiper arm away from the windshield and locate the release tab or button on the wiper blade. Press it, and then slide the blade off the wiper arm. Attach the new wiper blade by sliding it onto the arm until it clicks into place. Finally, gently lower the wiper arm back onto the windshield.
How do I reset the maintenance light on my Isuzu I280?
To reset the maintenance light on your Isuzu I280, start by turning the ignition switch to the "ON" position without starting the engine. Within five seconds, fully press the gas pedal to the floor three times. Wait for the maintenance light to start flashing and then release the gas pedal. The light should reset, indicating that the maintenance reminder has been successfully cleared.
How often should I change the transmission fluid in my Isuzu I280?
The transmission fluid in your Isuzu I280 should be changed every 30,000 to 60,000 miles, or as recommended by the manufacturer. Regular transmission fluid changes help to maintain smooth shifting, prevent overheating, and prolong the life of your transmission. It is important to use the correct type of transmission fluid specified in the owner's manual for optimal performance.
How often should I replace the air filter in my Isuzu I280?
The air filter in your Isuzu I280 should be replaced every 12,000 to 15,000 miles or at least once a year, depending on your driving conditions. A clean air filter is essential for maintaining good engine performance and fuel efficiency. Regular replacement prevents dirt and debris from entering the engine, ensuring proper airflow and protecting sensitive components.
How often should I rotate the tires on my Isuzu I280?
It is recommended to rotate the tires on your Isuzu I280 every 5,000 to 7,500 miles, or as specified in the vehicle's owner's manual. Regular tire rotation helps to ensure even wear and extends the lifespan of your tires. It also promotes better handling and improves fuel efficiency by maintaining proper traction and balance.
What does the check engine light indicate in my Isuzu I280?
The check engine light in your Isuzu I280 indicates that there is a problem with one or more of the engine's subsystems. It could be anything from a loose gas cap to a more serious issue with the engine or emission control system. When the light comes on, it is recommended to have your vehicle diagnosed by a qualified mechanic to determine the exact cause and take appropriate action.
What is the recommended tire pressure for my Isuzu I280?
The recommended tire pressure for your Isuzu I280 is typically listed on a sticker located on the driver's side door jamb or in the owner's manual. It is important to maintain the proper tire pressure as specified by the manufacturer to ensure safe driving, optimal handling, and maximum tire life. Regularly check and adjust the tire pressure, especially before long trips or when the tires are cold.
What type of engine oil should I use for my Isuzu I280?
For your Isuzu I280, it is recommended to use 5W-30 engine oil. This type of oil provides excellent lubrication and ensures optimal performance of your engine, especially during cold starts. It also helps to maintain the longevity of your engine by reducing wear and tear.
There are currently no manuals available for Isuzu I280 at this time.
