Symptoms of P0175 OBD II Trouble Code
- The MAF (Mass Air Flow) Sensor is dirty or faulty. Note: The use of "oiled"
air filters can cause the MAF to become dirty if the filter is over-oiled
- There could be a vacuum leak.
- There could be a fuel pressure or delivery problem
Common Causes of P0175 OBD II Trouble Code
- Inspect all vacuum and PCV hoses, replace if necessary
- Clean the MAF sensor. Consult your service manual for it's location if you
need help. I find it's best to take it off and spray it with electronics cleaner
or brake cleaner. Make sure you are careful not to damage the MAF sensor,
and make sure it's dry before reinstalling
- Inspect fuel lines for cracks, leaks, or pinches
- Check the fuel pressure at the fuel rail
- Check the fuel injectors, they may be dirty. Use fuel injector cleaner or
get them professionally cleaned/replaced.
- Check for an exhaust leak before the first oxygen sensor (this is unlikely
to cause the problem, but it is possible)