Lexus IS 220 Workshop Manuals and Repair Manuals
Every Manual available online - found by our community and shared for FREE. Enjoy!
Lexus IS 220
The Lexus IS is a series of entry-level luxury cars sold by Lexus since 1998. The IS was introduced as an entry-level sport model. In parts of Europe, the IS models sold by Lexus included the IS 250 and IS 220d sedans. Production of this model started in 2005. In 2010, coinciding with the second IS line refresh, the diesel IS 220d was detuned with improved fuel consumption figures but lower power output by 27 bhp (20 kW; 27 PS). The addition was called the IS 200d.Lexus IS 220 FAQ's
How do I change the cabin air filter in my Lexus IS 220?
To change the cabin air filter in a Lexus IS 220, locate the filter housing behind the glove compartment. Open the glove compartment and remove any contents. Release the glove compartment stops, allowing it to swing downward. Locate the filter housing cover and remove it. Take out the old filter and replace it with a new one, ensuring proper alignment. Reattach the filter housing cover, then swing the glove compartment back up and secure the stops.
How do I check the battery voltage in my Lexus IS 220?
To check the battery voltage in a Lexus IS 220, turn off all electrical accessories and ensure the vehicle is parked with the engine off. Connect a digital multimeter's red lead to the positive terminal of the battery and the black lead to the negative terminal. The multimeter should display the battery voltage. A fully charged battery should read around 12.6 volts or higher. If the voltage is significantly lower, the battery may need to be recharged or replaced.
How do I check the engine coolant level in my Lexus IS 220?
To check the engine coolant level in a Lexus IS 220, park the vehicle on a level surface, wait for the engine to cool down, and locate the coolant reservoir under the hood. The reservoir has "Full" and "Low" markings. Ensure the coolant level is between these markings and add coolant if necessary.
How do I check the transmission fluid level in my Lexus IS 220?
To check the transmission fluid level in a Lexus IS 220, park the vehicle on a level surface and start the engine. With the engine running, locate the transmission dipstick, usually near the back of the engine bay. Pull out the dipstick, wipe it clean, reinsert it fully, then pull it out again. Check the fluid level on the dipstick, ensuring it falls within the designated range. Add fluid if necessary, using the recommended type as specified in the owner's manual.
How do I jump-start my Lexus IS 220?
To jump-start a Lexus IS 220, park a functioning vehicle with a charged battery close to the dead vehicle. Attach one end of the jumper cables to the positive terminal of the working battery and the other end to the positive terminal of the dead battery. Then, attach one end of the second cable to the negative terminal of the working battery and the other end to a grounded metal surface on the dead vehicle. Start the engine of the functioning vehicle, let it run for a few minutes, then attempt to start the dead vehicle.
How do I replace a headlight bulb in my Lexus IS 220?
To replace a headlight bulb in a Lexus IS 220, open the hood and locate the back of the headlight assembly. Twist and remove the bulb socket, then pull out the old bulb. Insert the new bulb, making sure not to touch the glass with bare hands, and twist the socket back into place. Test the headlight to ensure proper functionality.
How do I replace the brake pads in my Lexus IS 220?
To replace the brake pads in a Lexus IS 220, start by loosening the lug nuts on the wheel. Lift the vehicle using a jack and secure it with jack stands. Remove the wheel to access the brake caliper. Use a suitable tool to compress the caliper piston, then remove the caliper bolts and lift the caliper off the rotor. Remove the old brake pads, install the new ones, and reassemble the caliper. Finally, reinstall the wheel, lower the vehicle, and torque the lug nuts to the specified value.
How do I reset the maintenance light on my Lexus IS 220?
To reset the maintenance light in a Lexus IS 220, turn the ignition switch to the "ON" position without starting the engine. Press the trip meter button until the odometer displays "ODO." Turn the ignition off, then press and hold the trip meter button while turning the ignition back to the "ON" position. Continue holding the button until the odometer displays "000000" and the maintenance light turns off.
How often should I change the oil in my Lexus IS 220?
The oil in a Lexus IS 220 should be changed approximately every 5,000 miles or every 6 months, whichever comes first. Regularly changing the oil ensures proper lubrication of the engine components, extends the life of the engine, and helps maintain optimal performance.
How often should I replace the air filter in my Lexus IS 220?
The air filter in a Lexus IS 220 should typically be replaced every 30,000 miles or as recommended by the manufacturer. A clean air filter promotes better airflow to the engine, improves fuel efficiency, and helps prevent dust and debris from entering the engine.
How often should I replace the spark plugs in my Lexus IS 220?
The spark plugs in a Lexus IS 220 generally need to be replaced every 60,000 to 100,000 miles. Worn out or faulty spark plugs can lead to misfires, reduced fuel efficiency, and engine performance issues.
How often should I replace the timing belt in my Lexus IS 220?
The timing belt in a Lexus IS 220 typically needs to be replaced every 90,000 to 100,000 miles or as recommended by the manufacturer. A worn or broken timing belt can cause severe engine damage, so it's important to follow the recommended replacement interval.
What is the recommended tire pressure for my Lexus IS 220?
The recommended tire pressure for a Lexus IS 220 can vary depending on the specific model and tire size. However, it is generally around 32 to 35 psi for the front tires and 32 to 36 psi for the rear tires. Proper tire pressure ensures better handling, fuel efficiency, and tire longevity.
What should I do if my Lexus IS 220 is overheating?
If your Lexus IS 220 is overheating, safely pull over to the side of the road and turn off the engine. Allow the engine to cool down before attempting any further action. Check the coolant level, radiator hoses, and radiator cap for any signs of leaks or damage. If necessary, add coolant and have the vehicle inspected by a qualified technician.
What type of fuel should I use in my Lexus IS 220?
The Lexus IS 220 requires the use of unleaded gasoline with an octane rating of at least 91. Using the recommended fuel ensures proper combustion, prevents engine knocking, and optimizes fuel efficiency.
Get notified for new manuals?
We'll send you a quick email when a new Lexus IS 220 manual is added.
There are currently no manuals available for Lexus IS 220 at this time.