Lexus NX 300 Workshop Manuals and Repair Manuals
Every Manual available online - found by our community and shared for FREE. Enjoy!
Lexus NX 300
The Lexus NX is a luxury compact crossover manufacturedby Lexus, the luxury division of Toyota. The name NX stands for Nimble Crossover. The NX was revealed at Beijing International Automotive Exhibition on April 20, 2014. Lexus NX models sold in the United States will feature slightly altered fascias which facilitate higher departure angles, with sales beginning in January 2015. It will feature the newly developed 8AR-FTS 2.0L turbocharged inline four cylinder direct injection engine in most trims. The NX is the first Lexus vehicle to feature a turbocharged gasoline engine in the US market.Lexus NX 300 FAQ's
How do I check the tire pressure on my Lexus NX 300?
To check the tire pressure on your Lexus NX 300, start by ensuring the tires are cold. Locate the tire pressure monitoring system (TPMS) button, usually located on the lower left side of the dashboard. Press and hold the TPMS button until the tire pressure display appears on the instrument cluster. Compare the readings to the recommended tire pressure listed in the owner's manual and adjust if necessary.
How do I check the transmission fluid level in my Lexus NX 300?
To check the transmission fluid level in your Lexus NX 300, park the vehicle on a level surface and ensure the engine is warm. Locate the transmission dipstick, usually labeled with a yellow handle, and remove it. Wipe the dipstick clean, reinsert it fully, then remove it again and check the fluid level. The fluid should be within the designated "Hot" or "Cold" range, as indicated on the dipstick. If the fluid level is low, add the recommended transmission fluid through the dipstick tube.
How do I jump-start my Lexus NX 300?
To jump-start your Lexus NX 300, you will need a set of jumper cables and a functioning vehicle with a charged battery. First, park the functioning vehicle close to your Lexus NX 300, ensuring the two vehicles do not touch. Connect the positive (+) red cable clamp to the positive terminal of the dead battery, then connect the other end of the red cable to the positive terminal of the functioning vehicle's battery. Connect the negative (-) black cable clamp to the negative terminal of the functioning vehicle's battery, and the other end of the black cable to an unpainted metal surface on the engine block of your Lexus NX 300. Start the functioning vehicle and let it run for a few minutes, then attempt to start your Lexus NX 300.
How do I program a new key fob for my Lexus NX 300?
To program a new key fob for your Lexus NX 300, insert the key into the ignition and turn it to the "ON" position. Within 10 seconds, press and release the lock and unlock buttons on the existing key fob simultaneously. Within 10 seconds, press and release the lock and unlock buttons on the new key fob simultaneously. The door locks should cycle, indicating successful programming. Repeat these steps for any additional key fobs.
How do I replace a burnt-out headlight bulb on my Lexus NX 300?
To replace a burnt-out headlight bulb on your Lexus NX 300, open the hood and locate the back of the headlight assembly. Twist the bulb socket counterclockwise to remove it from the assembly, then pull out the old bulb. Insert the new bulb into the socket, making sure it is securely in place, then reinsert the socket into the headlight assembly and twist it clockwise to lock it in position.
How do I replace the brake pads on my Lexus NX 300?
To replace the brake pads on your Lexus NX 300, start by loosening the lug nuts on the wheel of the brake pads you wish to replace. Lift the vehicle using a jack and secure it with jack stands. Remove the lug nuts and the wheel to access the brake caliper. Remove the caliper bolts, then slide the caliper off the rotor. Remove the old brake pads, and using a C-clamp or brake caliper tool, compress the caliper piston. Install the new brake pads, slide the caliper back onto the rotor, and secure it with the caliper bolts. Reinstall the wheel, lower the vehicle, and tighten the lug nuts.
How do I replace the cabin air filter on my Lexus NX 300?
To replace the cabin air filter on your Lexus NX 300, open the glove box and remove its contents. Squeeze the sides of the glove box inward to allow it to drop down further, revealing the cabin air filter cover. Remove the cover by pressing the tabs on each side, then slide out the old air filter. Insert the new air filter in the same orientation as the old one, ensuring it is securely in place. Reinstall the cabin air filter cover and push the glove box back into its original position.
How do I replace the windshield wiper blades on my Lexus NX 300?
To replace the windshield wiper blades on your Lexus NX 300, lift the wiper arm away from the windshield until it locks in a raised position. Locate the release tab on the wiper blade connector and press it, then slide the old wiper blade off the wiper arm. Align the new wiper blade with the wiper arm and slide it on until it clicks into place. Gently lower the wiper arm back onto the windshield.
How do I reset the maintenance light on my Lexus NX 300?
To reset the maintenance light on your Lexus NX 300, turn the ignition switch to the "ON" position without starting the engine. Press the "MENU" button on the multi-information display until "MAINTENANCE" is displayed. Press and hold the "ENTER" button until the "RESET?" message appears, then release and press "ENTER" again to confirm the reset.
How often should I change the oil in my Lexus NX 300?
It is recommended to change the oil in your Lexus NX 300 every 7,500 miles or every six months, whichever comes first. Regular oil changes help maintain the engine's performance and prolong its lifespan. Additionally, following the manufacturer's recommended oil viscosity and quality is crucial for optimal engine function.
How often should I replace the air filter in my Lexus NX 300?
It is recommended to replace the engine air filter in your Lexus NX 300 every 30,000 miles or as indicated by the maintenance schedule. A clean air filter helps maintain proper air flow to the engine, improving fuel efficiency and protecting the engine from contaminants. However, if you drive in dusty or dirty conditions frequently, it may be necessary to replace the air filter more frequently.
How often should I rotate the tires on my Lexus NX 300?
It is recommended to rotate the tires on your Lexus NX 300 every 5,000 to 7,500 miles or as indicated by the maintenance schedule. Regular tire rotations help ensure even tire wear and maximize tire life. It is also recommended to have the wheel alignment checked after rotating the tires.
What is the recommended tire pressure for the Lexus NX 300?
The recommended tire pressure for the Lexus NX 300 can vary depending on the specific model and tire size. However, the general recommended tire pressure range is typically between 32-35 psi for the front tires and 33-36 psi for the rear tires. It is important to refer to the sticker located on the driver's side door jamb or the owner's manual for the precise tire pressure specifications for your specific vehicle.
What type of fuel should I use for my Lexus NX 300?
The Lexus NX 300 requires premium unleaded gasoline with an octane rating of 91 or higher. Using the recommended fuel ensures proper engine combustion and prevents potential knocking or pinging issues. Using lower octane fuel can negatively impact performance and fuel efficiency.
Get notified for new manuals?
We'll send you a quick email when a new Lexus NX 300 manual is added.
There are currently no manuals available for Lexus NX 300 at this time.