Mercedes ML 420 Workshop Manuals and Repair Manuals
Every Manual available online - found by our community and shared for FREE. Enjoy!
Mercedes ML 420
The Mercedes-Benz M-Class (or ML-Class) is a mid-size luxury sport utility vehicle (SUV), introduced in 1997 as a 1998 model, and built by the German automaker Mercedes-Benz. Gradually, the M-Class became a sales success in the United States and Mexico. ML 420 is a five-door sport utility vehicle manufactured between 2008 and 2009. It is available as rear-wheel or front-wheel drive. It is produced with 3,996 cc diesel engines. This model s engine can produce power of 225 kW. Car is available with manual and automatic transmission style. The GLE-Class name will be used in 2015 for the forthcoming facelifted Mercedes-Benz M-Class.
Mercedes ML 420 FAQ's
How do I change the oil in a Mercedes ML 420?
To change the oil in a Mercedes ML 420, start by removing the oil drain plug underneath the engine and allowing the old oil to drain completely. Then, replace the drain plug and remove the oil filter using an oil filter wrench. Install a new oil filter and pour in the recommended amount and type of oil as specified in the vehicle's manual.
How do I check the engine oil level in a Mercedes ML 420?
To check the engine oil level in a Mercedes ML 420, park the vehicle on level ground and ensure the engine is turned off. Locate the oil dipstick, usually with a bright yellow handle, and remove it from the dipstick tube. Wipe it clean, reinsert it fully, and then remove it again to check the oil level. The oil level should be between the minimum and maximum marks on the dipstick.
How do I replace a broken side mirror on a Mercedes ML 420?
To replace a broken side mirror on a Mercedes ML 420, start by removing the interior door panel to access the mirror assembly. Disconnect any electrical connectors and remove the mounting screws or bolts holding the mirror in place. Install the new mirror, reconnect the electrical connectors, and secure it with the mounting screws or bolts. Finally, reinstall the interior door panel, making sure all clips are properly engaged.
How do I replace a burnt-out headlight bulb in a Mercedes ML 420?
To replace a burnt-out headlight bulb in a Mercedes ML 420, open the hood and locate the back of the headlight assembly. Twist and remove the bulb socket, then carefully pull out the old bulb. Insert the new bulb, making sure not to touch the glass surface. Finally, reattach the bulb socket and test the new headlight.
How do I replace a faulty ignition coil in a Mercedes ML 420?
To replace a faulty ignition coil in a Mercedes ML 420, start by locating the ignition coil pack, usually on top of the engine. Disconnect the electrical connector and remove the mounting bolts holding the coil in place. Carefully remove the old coil and install the new one, ensuring a secure fit. Finally, reconnect the electrical connector and tighten the mounting bolts. It is advisable to replace all ignition coils simultaneously for optimal performance.
How do I reset the service indicator in a Mercedes ML 420?
To reset the service indicator in a Mercedes ML 420, start by turning the ignition to position 1 (without starting the engine). Press and hold the trip reset button on the instrument cluster until the service indicator resets to 100%. Release the button and turn off the ignition. The service indicator should now be reset, and the vehicle's maintenance schedule will be recalibrated.
How do I reset the tire pressure monitoring system in a Mercedes ML 420?
To reset the tire pressure monitoring system in a Mercedes ML 420, start by ensuring all tires are properly inflated to the recommended pressure. Then, turn the ignition to position 2 (without starting the engine) and select the "Tire Pressure" menu on the instrument cluster. Follow the prompts to reset the system, which may involve pressing a button or confirming the reset. Once the reset is complete, the tire pressure monitoring system will recalibrate and display the correct tire pressures.
How often should I replace the air filter in a Mercedes ML 420?
The air filter in a Mercedes ML 420 should be replaced approximately every 20,000 to 30,000 miles or as specified in the vehicle's manual. However, in dusty or harsh driving conditions, it may be necessary to replace the air filter more frequently to ensure optimal engine performance and fuel efficiency. Regularly inspecting the air filter for any signs of dirt or debris is also recommended.
What are the recommended tire pressure specifications for a Mercedes ML 420?
The recommended tire pressure specifications for a Mercedes ML 420 can be found in the vehicle's manual. Typically, the recommended tire pressure ranges from 30 to 35 PSI, depending on factors such as load capacity and driving conditions. It is important to check and adjust the tire pressure regularly to ensure optimal handling and tire longevity.
What is the recommended interval for changing the transmission fluid in a Mercedes ML 420?
The recommended interval for changing the transmission fluid in a Mercedes ML 420 is typically every 50,000 to 100,000 miles, depending on the driving conditions and usage. However, it is important to consult the vehicle's manual for specific recommendations and to ensure proper maintenance of the transmission system. Regularly checking the transmission fluid level and quality is also advised.
What is the recommended interval for replacing the brake pads in a Mercedes ML 420?
The recommended interval for replacing the brake pads in a Mercedes ML 420 can vary depending on driving habits, road conditions, and pad material. However, as a general guideline, it is advisable to inspect the brake pads every 10,000 to 15,000 miles and replace them if the thickness is below the minimum specified in the vehicle's manual. Regular brake inspections and maintenance are crucial for ensuring safe and reliable braking performance.
What should I do if the Mercedes ML 420's battery is dead?
If the Mercedes ML 420's battery is dead, you can jump-start the vehicle using jumper cables and a working vehicle with a charged battery. Connect the positive terminals of both batteries with a jumper cable, then connect one end of another cable to the negative terminal of the working battery and the other end to a metal surface on the dead vehicle, away from the battery. Start the working vehicle and let it run for a few minutes, then try starting the dead vehicle. If it starts, let it run for a while to recharge the battery.
What should I do if the Mercedes ML 420's check engine light comes on?
If the check engine light comes on in a Mercedes ML 420, it is recommended to have the vehicle diagnosed by a qualified mechanic or using a diagnostic tool capable of reading the vehicle's onboard computer codes. The check engine light can indicate various issues, ranging from minor to more serious problems. Ignoring the light could potentially lead to further damage or reduced performance, so it is best to address the issue promptly.
What type of coolant should I use in a Mercedes ML 420?
It is recommended to use a high-quality, ethylene glycol-based coolant in a Mercedes ML 420. The coolant should meet the specifications outlined in the vehicle's manual, typically a coolant with a mixture of 50% coolant and 50% distilled water. Using the correct coolant is essential for maintaining proper engine temperature and preventing corrosion within the cooling system.
Get notified for new manuals?
We'll send you a quick email when a new Mercedes ML 420 manual is added.