1994 Acura NSX Body Repair Manual PDF

Preparation of Work
Description
Most monocoque bodies are composed as a single unit by welding together pressed parts made of steel plates which come
in a variety of different shapes and sizes. Each part is responsible for displaying a certain strength and durability in order that
it may play its role in meeting the functions of the body as a whole.
The NSX has an all aluminum monocoque body made of the aluminum alloy. Generally speaking, the collision damage of the
aluminum alloy body is not very different from that of the steel plate body.
Damage to the exterior of the body can be inspected visually, but where there has been an external impact, it is necessary to
inspect the extent of the damage. In some cases, the deformation has spread beyond the actual areas which were in the collision
and so this has to be inspected closely.
1175
mm
(46.3 in.)
Front wheel alignment:
Rear wheel alignment:
Camber
Caster
Toe
Wheel t u r n i n g
angle
-0°
2 0 '
±
3 0 '
+
8°
00' ± 4 5 '
Out 3.5 ± 1 mm
(0.14
±
0 .0 4
in)
In
Out
33°06' ± 2 °
26°34'
Camber
Toe
-1°30'±30'
In
4.0±1 mm (0.16±0
04 in)

1994 Acura NSX Body Repair Manual Summary of Content

Preparation of WorkDescription Most monocoque bodies are composed as a single unit by welding together pressed parts made of steel plates which comein a variety of different shapes and sizes. Each part is responsible for displaying a certain strength and durability in order thatit may play its role in meeting the functions of the body as a whole. The NSX has an all aluminum monocoque body made of the aluminum alloy. Generally speaking, the collision damage of thealuminum alloy body is not very different from that of the steel plate body.Damage to the exterior of the body can be inspected visually, but where there has been an external impact, it is necessary toinspect the extent of the damage. In some cases, the deformation has spread beyond the actual areas which were in the collisionand so this has to be inspected closely.1175 mm (46.3 in.)Front wheel alignment:Rear wheel alignment:CamberCasterToeWheel t u r n i n gangle-0 2 0 ' 3 0 '+ 8 00' 4 5 'Out 3.5 1 mm (0.14 0 .0 4 in)InOut3306' 2 2634'CamberToe-130'30'In4.01 mm (0.16004 in)