Corvette C6 2009 Owners Manual PDF | Page 109

This device complies with RSS-210 of Industry Canada.
Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference received,
including interference that may cause undesired
operation of the device.
The Canadian Registration ID number is 3521A-GTV06A.
Changes or modifications to this system by other than
an authorized service facility could void authorization to
use this equipment.
Universal Home Remote System
Operation
On vehicles with this feature there are three round Light
Emitting Diode (LED) indicator lights above the Universal
Home Remote buttons, follow the instructions below.
This system provides a way to replace up to three
remote control transmitters used to activate devices
such as garage door openers, security systems,
and home automation devices.
Do not use this system with any garage door opener
that does not have the stop and reverse feature.
This includes any garage door opener model
manufactured before April 1, 1982.
Read the instructions completely before attempting to
program the transmitter. Because of the steps involved,
it may be helpful to have another person assist with
programming the transmitter.
Be sure to keep the original remote control transmitter for
use in other vehicles, as well as, for future programming.
Only the original remote control transmitter is needed for
Fixed Code programming. The programmed buttons
should be erased when the vehicle is sold or the lease
ends. See “Erasing Universal Home Remote Buttons”
later in this section.
Park the vehicle outside of the garage when
programming a garage door. Be sure that people
and objects are clear of the garage door or gate that is
being programmed.
2-45

Summary of Content

This device complies with RSS-210 of Industry Canada.Operation is subject to the following two conditions:1. This device may not cause interference.2. This device must accept any interference received,including interference that may cause undesiredoperation of the device.The Canadian Registration ID number is 3521A-GTV06A.Changes or modications to this system by other thanan authorized service facility could void authorization touse this equipment.Universal Home Remote SystemOperationOn vehicles with this feature there are three round LightEmitting Diode (LED) indicator lights above the UniversalHome Remote buttons, follow the instructions below.This system provides a way to replace up to threeremote control transmitters used to activate devicessuch as garage door openers, security systems,and home automation devices.Do not use this system with any garage door openerthat does not have the stop and reverse feature.This includes any garage door opener modelmanufactured before April 1, 1982.Read the instructions completely before attempting toprogram the transmitter. Because of the steps involved,it may be helpful to have another person assist withprogramming the transmitter.Be sure to keep the original remote control transmitter foruse in other vehicles, as well as, for future programming.Only the original remote control transmitter is needed forFixed Code programming. The programmed buttonsshould be erased when the vehicle is sold or the leaseends. See Erasing Universal Home Remote Buttonslater in this section.Park the vehicle outside of the garage whenprogramming a garage door. Be sure that peopleand objects are clear of the garage door or gate that isbeing programmed.2-45