2009 Ford Edge Owners Manual PDF | Page 84

Erasing HomeLink? buttons
To erase the three programmed
buttons (individual buttons cannot
be erased):
? Press and hold the two outer
HomeLink? buttons until the
indicator light begins to
flash-after 20 seconds. Release
both buttons. Do not hold for
longer that 30 seconds.
HomeLink? is now in the train (or learning) mode and can be
programmed at any time beginning with Step 1 in the Programming
section.
Reprogramming a single HomeLink? button
To program a device to HomeLink? using a HomeLink? button previously
trained, follow these steps:
1. Press and hold the desired HomeLink? button. Do NOT release the
button.
2. The indicator light will begin to flash after 20 seconds. Without
releasing the HomeLink? button, follow Step 1 in the Programming
section.
For questions or comments, contact HomeLink? at www.homelink.com
or 1?800?355?3515.
MINI MESSAGE CENTER (IF EQUIPPED)
Selectable features
Press and release the TRIP/RESET stem to scroll and reset the following
functions. Select or reset the function by holding the TRIP/RESET stem
for more than two seconds.
Info menu
This menu displays the following control displays:
? Odometer
? Trip odometer A or B
? Reverse Park Aid (if equipped)
? Autolamp (if equipped)
Driver Controls
84
2009 Edge (edg)
Owners Guide, 3rd Printing
USA (fus)

2009 Ford Edge Owners Manual Summary of Content

Erasing HomeLink buttonsTo erase the three programmedbuttons (individual buttons cannotbe erased): Press and hold the two outerHomeLink buttons until theindicator light begins toflash-after 20 seconds. Releaseboth buttons. Do not hold forlonger that 30 seconds.HomeLink is now in the train (or learning) mode and can beprogrammed at any time beginning with Step 1 in the Programmingsection.Reprogramming a single HomeLink buttonTo program a device to HomeLink using a HomeLink button previouslytrained, follow these steps:1. Press and hold the desired HomeLink button. Do NOT release thebutton.2. The indicator light will begin to flash after 20 seconds. Withoutreleasing the HomeLink button, follow Step 1 in the Programmingsection.For questions or comments, contact HomeLink at www.homelink.comor 18003553515.MINI MESSAGE CENTER (IF EQUIPPED)Selectable featuresPress and release the TRIP/RESET stem to scroll and reset the followingfunctions. Select or reset the function by holding the TRIP/RESET stemfor more than two seconds.Info menuThis menu displays the following control displays: Odometer Trip odometer A or B Reverse Park Aid (if equipped) Autolamp (if equipped)Driver Controls842009 Edge (edg)Owners Guide, 3rd PrintingUSA (fus)