2009 GMC Canyon Owners Manual PDF | Page 136

Turn Signal On Chime
If a turn signal is left on for more than 3/4 of a mile
(1.2 km), a chime will sound at each ?ash of the turn
signal and the message TURN SIGNAL will also appear
in the DIC. To turn the chime and message off, move
the turn signal lever to the off position.
See ?TURN SIGNAL? under DIC Warnings and
Messages on page 3-38 for more information.
Headlamp High/Low-Beam Changer
23Headlamp High/Low Beam Changer: Push
the turn signal/multifunction lever away from you to turn
the high beams on.
Pull the lever towards you to return to low beams.
This indicator light turns on in the instrument panel
cluster when the high beam headlamps are on.
Flash-to-Pass
This feature lets you use the high-beam headlamps to
signal a driver in front of you that you want to pass.
It works even if the headlamps are in the automatic
position.
To use it, pull the turn signal lever toward you, then
release it.
If the headlamps are in the automatic position or on low
beam, the high-beam headlamps will turn on. They will
stay on as long as the lever is held toward you.
The high-beam indicator on the instrument panel cluster
will come on. Release the lever to return to normal
operation.
Windshield Wipers
The windshield wiper controls are located on the
multifunction lever. They are controlled by turning the
band with this
z symbol.
The windshield wipers work in all ignition positions,
except off. This includes the Retained Access Power
mode. See Retained Accessory Power (RAP) on
page 2-19.
3-8

Summary of Content

Turn Signal On ChimeIf a turn signal is left on for more than 3/4 of a mile(1.2 km), a chime will sound at each ash of the turnsignal and the message TURN SIGNAL will also appearin the DIC. To turn the chime and message off, movethe turn signal lever to the off position.See TURN SIGNAL under DIC Warnings andMessages on page 3-38 for more information.Headlamp High/Low-Beam Changer23Headlamp High/Low Beam Changer: Pushthe turn signal/multifunction lever away from you to turnthe high beams on.Pull the lever towards you to return to low beams.This indicator light turns on in the instrument panelcluster when the high beam headlamps are on.Flash-to-PassThis feature lets you use the high-beam headlamps tosignal a driver in front of you that you want to pass.It works even if the headlamps are in the automaticposition.To use it, pull the turn signal lever toward you, thenrelease it.If the headlamps are in the automatic position or on lowbeam, the high-beam headlamps will turn on. They willstay on as long as the lever is held toward you.The high-beam indicator on the instrument panel clusterwill come on. Release the lever to return to normaloperation.Windshield WipersThe windshield wiper controls are located on themultifunction lever. They are controlled by turning theband with thisz symbol.The windshield wipers work in all ignition positions,except off. This includes the Retained Access Powermode. See Retained Accessory Power (RAP) onpage 2-19.3-8