2009 GMC Canyon Owners Manual PDF | Page 259

Hood Release
To open the hood, do the following:
1. Pull the handle with
this symbol on it. It is
located inside the
vehicle on the lower
left side of the
instrument panel.
2. Release the secondary latch on the hood. It is
located below the front center of the hood.
3. Lift the hood.
4. Release the hood prop from its retainer and put the
hood prop into the slot in the hood.
Before closing the hood, be sure all the ?ller caps are
on properly. Then lift the hood to relieve pressure on the
hood prop. Remove the hood prop from the slot in the
hood and return the prop to its retainer. Lower the hood
10 to 12 inches (25 to 30 cm) above the vehicle and
release it to latch fully. Check to make sure the hood is
closed and repeat the procedure if necessary.
5-11

Summary of Content

Hood ReleaseTo open the hood, do the following:1. Pull the handle withthis symbol on it. It islocated inside thevehicle on the lowerleft side of theinstrument panel.2. Release the secondary latch on the hood. It islocated below the front center of the hood.3. Lift the hood.4. Release the hood prop from its retainer and put thehood prop into the slot in the hood.Before closing the hood, be sure all the ller caps areon properly. Then lift the hood to relieve pressure on thehood prop. Remove the hood prop from the slot in thehood and return the prop to its retainer. Lower the hood10 to 12 inches (25 to 30 cm) above the vehicle andrelease it to latch fully. Check to make sure the hood isclosed and repeat the procedure if necessary.5-11