2009 GMC Canyon Owners Manual PDF | Page 273

How to Add Fluid
Here is how to add ?uid. Refer to the Maintenance
Schedule to determine what kind of ?uid to use. See
Recommended Fluids and Lubricants on page 6-11.
1. Remove the ?ller plug.
2. Add ?uid at the ?ller plug hole. Add only enough
?uid to bring the ?uid level up to the bottom of the
?ller plug hole.
3. Install the ?ller plug. Be sure the plug is fully
seated.
Hydraulic Clutch
The hydraulic clutch linkage in the vehicle is
self-adjusting. The clutch master cylinder reservoir is
?lled with hydraulic clutch ?uid.
The hydraulic clutch ?uid
reservoir cap has this
symbol on it. See Engine
Compartment Overview
on page 5-12 for reservoir
location.
It is not necessary to regularly check clutch ?uid unless
a leak in the system is suspected. Adding ?uid will
not correct a leak.
A ?uid loss in this system could indicate a problem.
Have the system inspected and repaired.
5-25

Summary of Content

How to Add FluidHere is how to add uid. Refer to the MaintenanceSchedule to determine what kind of uid to use. SeeRecommended Fluids and Lubricants on page 6-11.1. Remove the ller plug.2. Add uid at the ller plug hole. Add only enoughuid to bring the uid level up to the bottom of theller plug hole.3. Install the ller plug. Be sure the plug is fullyseated.Hydraulic ClutchThe hydraulic clutch linkage in the vehicle isself-adjusting. The clutch master cylinder reservoir islled with hydraulic clutch uid.The hydraulic clutch uidreservoir cap has thissymbol on it. See EngineCompartment Overviewon page 5-12 for reservoirlocation.It is not necessary to regularly check clutch uid unlessa leak in the system is suspected. Adding uid willnot correct a leak.A uid loss in this system could indicate a problem.Have the system inspected and repaired.5-25