4. To install the new wiper insert, slide the notched
end last, into the end with two blade claws. Then
slide the insert all the way through the blade claws
at the opposite end.
5. Make sure that the notches are locked by the
bottom claws. Make sure that all other claws
are properly locked on both sides of the insert slot.
6. Put the blade assembly pivot in the wiper arm hook.
Pull it up until the pivot locking tab locks in the
7. Carefully lower the wiper arm and blade assembly
into the windshield.
Your new vehicle comes with high-quality tires made by
a leading tire manufacturer. If you ever have questions
about your tire warranty and where to obtain service,
see your GM Warranty booklet for details. For additional
information refer to the tire manufacturer?s booklet
included with your vehicle?s Owner?s Manual.
Poorly maintained and improperly used tires
? Overloading your tires can cause
overheating as a result of too much
friction. You could have an air-out and a
serious accident. See Loading Your
Vehicle on page 4-31.
? Underin?ated tires pose the same danger
as overloaded tires. The resulting accident
could cause serious injury. Check all tires
frequently to maintain the recommended
pressure. Tire pressure should be
checked when your tires are cold. See
In?ation - Tire Pressure on page 5-58.
? Overin?ated tires are more likely to be cut,
punctured or broken by a sudden
impact ? such as when you hit a pothole.
Keep tires at the recommended pressure.
? Worn, old tires can cause accidents. If
your tread is badly worn, or if your tires
have been damaged, replace them.