?? Drain the engine coolant (see page 10-6).
?? Remove the bulkhead cover (see step 7 on page 09-4).
?? Remove the upper bracket cushion, then remove the bulkhead (see step 9 on page 09-5).
?? Remove the upper radiator hose and lower radiator hose.
?? Disconnect the fan motor connectors and radiator fan switch connector, then pull up the radiator.
?? Remove the fan shroud assemblies and other parts from the radiator.
?? Install the radiator in the reverse order of removal. Make sure the upper and lower cushions are set securely.
?? Install the bulkhead in the reverse order of removal. Apply body paint to the bulkhead mounting bolts.
?? Fill the radiator with engine coolant and bleed the air (see page 10-6).