2007 Hummer H2 Owners Manual PDF | Page 439

How to Check Lubricant
A. Filler Plug B. Drain Plug
1. Remove the ?ller plug (A). The ?uid level
should be just below the bottom of the
?ller plug hole located on the transfer case.
To get an accurate reading, the vehicle should
be on a level surface.
2. Add ?uid if necessary.
Refer to the Maintenance Schedule to
determine what kind of lubricant to use.
See Recommended Fluids and Lubricants
on page 528.
3. Reinstall the ?ller plug. Use care not to
overtighten the ?ller plug.
439

Summary of Content

How to Check LubricantA. Filler Plug B. Drain Plug1. Remove the ller plug (A). The uid levelshould be just below the bottom of theller plug hole located on the transfer case.To get an accurate reading, the vehicle shouldbe on a level surface.2. Add uid if necessary.Refer to the Maintenance Schedule todetermine what kind of lubricant to use.See Recommended Fluids and Lubricantson page 528.3. Reinstall the ller plug. Use care not toovertighten the ller plug.439