NOTE: The information in Technical Bulletins is intended for use by trained, professional technicians with the knowledge,
tools, and equipment required to do the job properly and safely. It informs these technicians of conditions that may occur
on some vehicles, or provides information that could assist in proper vehicle service. The procedures should not be
performed by “do-it-yourselfers.” If you are not a Retailer, do not assume that a condition described affects your vehicle.
Contact an authorized Jaguar service facility to determine whether the bulletin applies to a specific vehicle.
© Jaguar 2007 Page 1 of 17 9/21/2007
THIS BULLETIN REPLACES ALL ISSUES OF XJ501-09.
THE CHANGES ARE HIGHLIGHTED WITH GREY BACKGROUND
Supplemental Restraint System (SRS) Flash Code and PID
Code Definitions – Diagnostic Aid
AFFECTED VEHICLE RANGE:
XJ Range VIN: G000001 - Onwards
Model Year: 2004 - Onwards
Situation: This bulletin provides information on Flash Codes and Parameter Identification (PID) code
descriptions to assist in the diagnosis of Supplemental Restraint System (SRS) faults.
This document is to be used as a guide only. It supports the existing diagnostic equipment, circuit
diagrams in the Electrical Guide, and the Workshop Manual.
Action: In the event of a customer concern of the above, perform the following Diagnostic Procedure
None required. Informational purposes only.
Jaguar IDS with IDS DVD 108 or later and Midtronics PCS-550 Vehicle Power Supply are
NOTE: Repair procedures are under constant review, and therefore times are subject to
change; those quoted here must be taken as guidance only. Always refer to DDW to obtain the
latest repair time.
DDW requires the use of causal part numbers. Labor only claims must show the causal part number
with a quantity of zero.
Normal warranty policy and procedures apply.
SRS Flash Code Diagnostics