Jeep Grand Cherokee 1998 Workshop Manual PDF

LUBRICATION AND MAINTENANCE
CONTENTS
page page
GENERAL INFORMATION .................. 1 MAINTENANCE SCHEDULE ................ 2
GENERAL INFORMATION
INDEX
page page
SPECIFICATIONS
ENGINE OIL—DIESEL ENGINES ............ 1
FLUID CAPACITIES ...................... 1
SPECIFICATIONS
ENGINE OIL—DIESEL ENGINES
Use only Diesel Engine Oil meeting standard MIL-
2104C or API Classification SG/CD or CCMC PD2.
SAE VISCOSITY GRADE
CAUTION: Low viscosity oils must have the proper
API quality or the CCMC G5 designation.
To assure of properly formulated engine oils, it is
recommended that SAE Grade 15W-40 engine oils
that meet Chrysler material standard MS-6395, be
used. European Grade 10W-40 oils are also accept-
able.
Oils of the SAE 5W-30 or 10W-30 grade number
are preferred when minimum temperatures consis-
tently fall below -12°C.
FLUID CAPACITIES
FUEL TANK
Diesel Engine Equipped Vehicles ..........87.4 L
ENGINE OIL
2.5L Diesel Engine (includes filter) .........6.5L
COOLING SYSTEM
2.5L Diesel ...........................9.8L
MANUAL TRANSMISSION
Recommended lubricant for AX15 transmissions is
Mopart 75W–90, API Grade GL–3 gear lubricant, or
equivalent.
Correct lubricant level is from the bottom edge, to
no more than 6 mm (1/4 in.) below the bottom edge of
the fill plug hole.
Approximate dry fill lubricant capacity is:
3.10 liters (3.27 qts.) for 4–wheel drive applica-
tions.
3.15 liters (3.32 qts.) for 2–wheel drive applica-
tions.
TRANSFER CASE
NV231 ...............................1.8L
FRONT AXLE
Model 181 ...........................1.48 L

Summary of Content

LUBRICATION AND MAINTENANCECONTENTSpage pageGENERAL INFORMATION .................. 1 MAINTENANCE SCHEDULE ................ 2GENERAL INFORMATIONINDEXpage pageSPECIFICATIONSENGINE OILDIESEL ENGINES ............ 1FLUID CAPACITIES ...................... 1SPECIFICATIONSENGINE OILDIESEL ENGINESUse only Diesel Engine Oil meeting standard MIL-2104C or API Classification SG/CD or CCMC PD2.SAE VISCOSITY GRADECAUTION: Low viscosity oils must have the properAPI quality or the CCMC G5 designation.To assure of properly formulated engine oils, it isrecommended that SAE Grade 15W-40 engine oilsthat meet Chrysler material standard MS-6395, beused. European Grade 10W-40 oils are also accept-able.Oils of the SAE 5W-30 or 10W-30 grade numberare preferred when minimum temperatures consis-tently fall below -12C.FLUID CAPACITIESFUEL TANKDiesel Engine Equipped Vehicles ..........87.4 LENGINE OIL2.5L Diesel Engine (includes filter) .........6.5LCOOLING SYSTEM2.5L Diesel ...........................9.8LMANUAL TRANSMISSIONRecommended lubricant for AX15 transmissions isMopart 75W90, API Grade GL3 gear lubricant, orequivalent.Correct lubricant level is from the bottom edge, tono more than 6 mm (1/4 in.) below the bottom edge ofthe fill plug hole.Approximate dry fill lubricant capacity is: 3.10 liters (3.27 qts.) for 4wheel drive applica-tions. 3.15 liters (3.32 qts.) for 2wheel drive applica-tions.TRANSFER CASENV231 ...............................1.8LFRONT AXLEModel 181 ...........................1.48 L