Mazda MX 5 2007 Workshop Manual PDF | Page 2

Fig. 1: Installing SST (Arms) To Cylinder Block Holes
Courtesy of MAZDA MOTORS CORP.
2. Assemble the SSTs (bolts, nuts and plate) to the specified positions.
3. Adjust the SSTs (bolts) so that less than 20 mm {0.79 in} of thread is exposed.
4. Make the SSTs (arms and plate) parallel by adjusting the SSTs (bolts and nuts).
2007 Mazda MX-5 Miata Sport
2006-08 ENGINE Mechanical - Overhaul - 2.0L (LF) & 2.3L (L3) - Mazda6 & MX-5 Miata
Microsoft
Thursday, July 09, 2009 2:43:25 PM Page 2 © 2005 Mitchell Repair Information Company, LLC.

Summary of Content

Fig. 1: Installing SST (Arms) To Cylinder Block Holes Courtesy of MAZDA MOTORS CORP. 2. Assemble the SSTs (bolts, nuts and plate) to the specified positions. 3. Adjust the SSTs (bolts) so that less than 20 mm {0.79 in} of thread is exposed. 4. Make the SSTs (arms and plate) parallel by adjusting the SSTs (bolts and nuts). 2007 Mazda MX-5 Miata Sport 2006-08 ENGINE Mechanical - Overhaul - 2.0L (LF) 2.3L (L3) - Mazda6 MX-5 Miata Microsoft Thursday, July 09, 2009 2:43:25 PM Page 2 2005 Mitchell Repair Information Company, LLC.