Mercedes CLS 300 Workshop Manuals and Repair Manuals
Every Manual available online - found by our community and shared for FREE. Enjoy!
Mercedes CLS 300
The Mercedes-Benz CLS is a four-door mid-size luxury coupe originally launched in 2004 and based on the W211 E-Class and was internally designated as the W219. The second generation CLS-Class was introduced in September 2010 and production started in the beginning of 2011. The CLS 300 was produced from 2009 until 2010. It was manufactured with 2,987 cc petrol engines, only automatic version is available. The CLS 300 can accelerate from 0-100 km/h in 7.7 seconds. Its top speed is listed as 245 km/h. More than 170,000 W219 type CLS-Class cars were produced when production ended on July 13, 2010.
Mercedes CLS 300 FAQ's
How can I reset the service light on my Mercedes CLS 300?
To reset the service light on a Mercedes CLS 300, follow these steps: 1. Turn on the ignition without starting the engine. 2. Use the buttons on the multifunction steering wheel to navigate to the instrument cluster's main menu. 3. Select "Assyst Plus" and then "Full Service." 4. Confirm the reset by pressing and holding the "OK" button. This will reset the service light and indicate that the service interval has been successfully reset.
How do I change a headlight bulb in a Mercedes CLS 300?
To change a headlight bulb in a Mercedes CLS 300, follow these steps: 1. Open the hood and locate the back of the headlight assembly. 2. Disconnect the electrical connector from the bulb. 3. Remove the retaining clip or ring securing the bulb. 4. Gently pull out the old bulb and insert the new one, making sure not to touch the glass. 5. Secure the bulb with the retaining clip or ring. 6. Reconnect the electrical connector. It is recommended to consult the vehicle's owner manual for specific instructions and precautions when changing headlight bulbs.
How do I change the air filter in a Mercedes CLS 300?
To change the air filter in a Mercedes CLS 300, follow these steps: 1. Open the hood and locate the air filter housing. 2. Remove the clips or screws securing the housing cover. 3. Lift the cover and remove the old air filter. 4. Clean the housing if necessary. 5. Install the new air filter, ensuring it is properly seated. 6. Secure the housing cover and ensure all fasteners are tightened. Regularly replacing the air filter improves engine performance and helps maintain good air quality inside the vehicle.
How do I change the cabin air filter in a Mercedes CLS 300?
To change the cabin air filter in a Mercedes CLS 300, follow these steps: 1. Open the glove compartment and remove any contents. 2. Squeeze the sides of the glove compartment to release the stops and allow it to swing down towards the floor. 3. Locate the cabin air filter housing cover and remove the retaining clips or screws. 4. Take out the old air filter and clean the housing if necessary. 5. Install the new air filter, ensuring it is properly seated. 6. Secure the housing cover and ensure all fasteners are tightened. Regularly replacing the cabin air filter helps maintain good air quality inside the vehicle and improves the performance of the HVAC system.
How do I change the windshield wiper blades on a Mercedes CLS 300?
To change the windshield wiper blades on a Mercedes CLS 300, follow these steps: 1. Lift the wiper arm away from the windshield and locate the release tab on the wiper blade. 2. Press the release tab and slide the old wiper blade off the wiper arm. 3. Align the new wiper blade with the wiper arm and slide it into place until it clicks securely. 4. Gently lower the wiper arm back onto the windshield. Regularly replacing worn wiper blades ensures clear visibility and promotes safer driving in inclement weather.
How do I check the transmission fluid level in a Mercedes CLS 300?
Checking the transmission fluid level in a Mercedes CLS 300 requires the engine to be running and the transmission to be at operating temperature. Park the vehicle on level ground, locate the transmission dipstick, and remove it. Wipe off the dipstick, reinsert it fully, and then remove it again to check the fluid level. The dipstick will have markings indicating the proper fluid level range. If the level is below the minimum mark, add the recommended transmission fluid gradually until it reaches the correct level.
How do I jump-start a Mercedes CLS 300?
To jump-start a Mercedes CLS 300, follow these steps: 1. Park the donor vehicle close to the Mercedes, but not touching. 2. Turn off the ignition on both vehicles and ensure all electrical systems are off. 3. Connect the positive (red) jumper cable to the positive terminal of the discharged battery. 4. Connect the other end of the positive cable to the positive terminal of the donor vehicle's battery. 5. Connect the negative (black) jumper cable to the negative terminal of the donor vehicle's battery. 6. Connect the other end of the negative cable to an unpainted metal surface on the Mercedes, away from the battery. 7. Start the donor vehicle and let it idle for a few minutes. 8. Start the Mercedes. Once the vehicle starts, remove the jumper cables in the reverse order of connection. It is important to follow these steps carefully to avoid potential damage to the vehicle's electrical system.
How do I program a new key fob for a Mercedes CLS 300?
To program a new key fob for a Mercedes CLS 300, follow these steps: 1. Insert the existing key into the ignition and turn it to position 2 (ON) without starting the engine. 2. Within 30 seconds, turn the key back to position 0 (OFF) and remove it from the ignition. 3. Within 60 seconds, press and hold the "Lock" button on the new key fob while simultaneously pressing the "Unlock" button five times. 4. Release both buttons and wait for the central locking system to respond by locking and unlocking the doors. 5. Repeat step 3
How do I reset the tire pressure monitoring system in a Mercedes CLS 300?
To reset the tire pressure monitoring system in a Mercedes CLS 300, follow these steps: 1. Ensure all tire pressures are correctly set according to the recommended values. 2. Turn on the ignition without starting the engine. 3. Use the arrow buttons on the multifunction steering wheel to navigate to the instrument cluster's main menu. 4. Select "Tire Pressure" and then "Reset." 5. Confirm the reset by pressing the "OK" button. This will reset the tire pressure monitoring system and allow it to recalibrate with the new tire pressures.
How often should the brake pads be replaced in a Mercedes CLS 300?
The brake pads on a Mercedes CLS 300 should typically be replaced every 30,000-50,000 miles, depending on driving habits and conditions. However, it is important to regularly inspect the brake pads for wear and replace them if they are worn beyond the manufacturer's specified limit. Maintaining proper brake pad thickness ensures optimal braking performance and safety.
How often should the engine oil be changed in a Mercedes CLS 300?
It is recommended to change the engine oil in a Mercedes CLS 300 every 10,000 miles or once a year, whichever comes first. Regular oil changes are essential to maintain the engine's performance and longevity. Following the manufacturer's recommended maintenance schedule ensures optimal lubrication and helps prevent premature wear and tear.
What is the recommended coolant for a Mercedes CLS 300?
The recommended coolant for a Mercedes CLS 300 is the Mercedes-Benz Genuine Coolant. This coolant is specifically formulated to provide optimal cooling and corrosion protection for the engine. Using the correct coolant helps maintain the engine's operating temperature, prevents overheating, and ensures the longevity of cooling system components.
What is the recommended tire pressure for a Mercedes CLS 300?
The recommended tire pressure for a Mercedes CLS 300 varies depending on the specific model and tire size. However, as a general guideline, the tire pressure is typically set around 32-35 PSI for the front tires and 35-38 PSI for the rear tires. Maintaining proper tire pressure not only ensures better fuel efficiency but also promotes even tire wear and improves overall handling and safety.
What type of engine does the Mercedes CLS 300 have?
The Mercedes CLS 300 is equipped with a 2.0-liter turbocharged inline-4 engine. This engine provides a balance between performance and fuel efficiency, delivering smooth acceleration and ample power for everyday driving. Its compact design allows for better weight distribution and enhances the vehicle's handling capabilities.
Get notified for new manuals?
We'll send you a quick email when a new Mercedes CLS 300 manual is added.