Mitsubishi Santamo Workshop Manuals and Repair Manuals
Every Manual available online - found by our community and shared for FREE. Enjoy!
Mitsubishi Santamo
The Mitsubishi Chariot, also called Mitsubishi Santamo, is a large multi-purpose vehicle (MPV) produced by the Japanese manufacturer Mitsubishi Motors from 1983 to 2003. It was based on the SSW concept car first exhibited at the 23rd Tokyo Motor Show in 1979, and named for the battle chariots used during the times of the ancient Greek and Roman Empires. Internationally, it has been sold under various names, including Mitsubishi Space Wagon, Mitsubishi Nimbus and Mitsubishi Expo. It was manufactured as a front engine, front-wheel or four-wheel drive. It is available with automatic and manual transmission style and was produced with both, petrol and diesel engines.Mitsubishi Santamo FAQ's
How do I change the brake pads on my Mitsubishi Santamo?
To change the brake pads on a Mitsubishi Santamo, start by safely lifting the vehicle and removing the wheel. Locate the brake caliper and remove the bolts holding it in place. Carefully remove the old brake pads and replace them with new ones, ensuring they are properly seated. Reinstall the brake caliper, tighten the bolts, and repeat the process for the other wheels.
How do I change the oil in my Mitsubishi Santamo?
To change the oil in your Mitsubishi Santamo, start by placing a drain pan underneath the oil pan. Remove the oil drain plug and let the old oil drain completely. Once drained, replace the drain plug and remove the oil filter. Install a new oil filter and fill the engine with the recommended amount and type of oil, checking the oil level using the dipstick.
How do I check and add coolant to my Mitsubishi Santamo?
To check and add coolant to your Mitsubishi Santamo, make sure the engine is cool before opening the radiator cap. Look at the coolant level in the reservoir and ensure it is between the minimum and maximum marks. If it is low, add a mixture of coolant and distilled water to the reservoir until it reaches the proper level. Be cautious not to overfill.
How do I clean and maintain the leather seats in my Mitsubishi Santamo?
To clean and maintain the leather seats in a Mitsubishi Santamo, start by vacuuming any loose dirt or debris. Mix a mild soap solution using warm water and a gentle leather cleaner. Dampen a clean cloth with the soapy solution and gently wipe the seats, taking care not to saturate the leather. Rinse the cloth with clean water and wipe away any soap residue. Finally, apply a leather conditioner to keep the seats supple and protected.
How do I replace a blown fuse in my Mitsubishi Santamo?
Locate the fuse panel, which is typically located under the dashboard or in the engine compartment. Use the fuse diagram in the owner's manual to identify the fuse associated with the specific component that is not working. Use a fuse puller or needle-nose pliers to remove the blown fuse and replace it with a new fuse of the same amperage rating.
How do I replace a damaged rear bumper on my Mitsubishi Santamo?
To replace a damaged rear bumper on a Mitsubishi Santamo, start by removing any screws or bolts securing the bumper to the vehicle. Carefully detach any electrical connectors, if applicable. Lift the damaged bumper off the vehicle and set it aside. Install the new bumper by aligning it with the mounting points and reconnecting any electrical connectors. Secure the new bumper in place using the appropriate screws or bolts.
How do I replace a damaged side mirror on my Mitsubishi Santamo?
To replace a damaged side mirror on a Mitsubishi Santamo, carefully remove the interior door panel to gain access to the mirror mounting bolts. Disconnect the electrical connector, if applicable, and remove the bolts holding the mirror in place. Install the new mirror by reversing the removal steps, ensuring it is securely fastened. Test the functionality of the new mirror before reattaching the door panel.
How do I replace a faulty headlight bulb in my Mitsubishi Santamo?
To replace a faulty headlight bulb in a Mitsubishi Santamo, open the hood and locate the back of the headlight assembly. Twist and remove the bulb socket from the headlight assembly, then remove the old bulb from the socket. Insert the new bulb into the socket, making sure it is securely in place. Reinstall the bulb socket into the headlight assembly and test the new bulb before closing the hood.
How do I replace a malfunctioning power window motor in my Mitsubishi Santamo?
To replace a malfunctioning power window motor in a Mitsubishi Santamo, start by carefully removing the door panel to access the motor. Disconnect the electrical connector and remove the mounting bolts securing the motor. Install the new motor by reversing the removal steps, making sure it is properly aligned. Test the window operation before reattaching the door panel.
How do I reset the maintenance light on my Mitsubishi Santamo?
To reset the maintenance light on a Mitsubishi Santamo, insert the key into the ignition and turn it to the "on" position without starting the engine. Locate the button or switch used for resetting the maintenance light, usually located near the speedometer or in the instrument cluster. Press and hold the button until the light flashes or turns off, indicating that the maintenance light has been successfully reset.
How do I troubleshoot a faulty air conditioning system in my Mitsubishi Santamo?
If the air conditioning system in your Mitsubishi Santamo is not functioning correctly, start by checking the refrigerant level using a pressure gauge. If the refrigerant level is low, it may indicate a leak that needs to be repaired. Additionally, inspect the compressor, condenser, and other components for any visible signs of damage or wear. Consult the Mitsubishi Santamo repair manual for further troubleshooting steps and specific diagnostic procedures.
How do I troubleshoot a non-starting Mitsubishi Santamo?
If your Mitsubishi Santamo is not starting, begin by checking the battery for a proper charge and ensuring all electrical connections are secure. If the battery is fine, inspect the ignition switch, starter motor, and fuel system components for any faults or malfunctions. It may be helpful to consult the troubleshooting section of the Mitsubishi Santamo repair manual for specific diagnostic steps and procedures.
How often should I replace the air filter in my Mitsubishi Santamo?
The air filter in a Mitsubishi Santamo should be replaced approximately every 12,000 to 15,000 miles or as recommended by the manufacturer. A dirty or clogged air filter can restrict airflow to the engine, reducing performance and fuel efficiency. Regularly inspect the air filter and replace it when it appears dirty or damaged.
How often should I replace the spark plugs in my Mitsubishi Santamo?
The spark plugs in a Mitsubishi Santamo should be replaced approximately every 30,000 to 45,000 miles or as recommended by the manufacturer. Worn or fouled spark plugs can lead to misfires, reduced fuel efficiency, and engine performance issues. Inspect the spark plugs regularly and replace them when necessary, following the specifications provided in the owner's manual.
What is the recommended tire pressure for a Mitsubishi Santamo?
The recommended tire pressure for a Mitsubishi Santamo is typically listed on a sticker located on the driver's side door jamb or in the owner's manual. It is important to maintain the proper tire pressure to ensure optimal handling, fuel efficiency, and tire life. Use a tire pressure gauge to check the current pressure and adjust it accordingly using an air compressor.
Get notified for new manuals?
We'll send you a quick email when a new Mitsubishi Santamo manual is added.
There are currently no manuals available for Mitsubishi Santamo at this time.