Revision: 2004 December 2004.5 350Z
CONSULT- II Functions AFS00295
CONSULT-II MAIN FUNCTION
In a diagnosis function (main function), there are ?SELF-DIAGNOSTIC RESULTS?, ?DATA MONITOR?, ?CAN
DIAG SUPPORT MNTR?, ?ACTIVE TEST?, ?FUNCTION TEST?, ?ECU PART NUMBER?.
CONSULT-II BASIC OPERATION PROCEDURE
1. Turn ignition switch OFF.
2. Connect CONSULT-II and CONSULT-II CONVERTER to the
data link connector.
If CONSULT-II is used with no connection of CONSULT-II
CONVERTER, malfunctions might be detected in self-diag-
nosis depending on control unit which carry out CAN com-
3. Turn ignition switch ON.
4. Touch ?START (NISSAN BASED VHCL)?.
5. Touch ?ABS? in the ?SELECT SYSTEM? screen.
Self-diagnostic results can be read and erased quickly. BRC-21, "
Input/Output data in the ABS actuator and electric unit (control unit) can be read. BRC-23, "
The results of transmit/receive diagnosis of communication can be read. ?
Diagnostic Test Mode in which CONSULT-II drives some actuators apart from the
ABS actuator and electric unit (control unit) and also shifts some parameters in a
Conducted by CONSULT-II instead of a technician to determine whether each sys-
tem is ?OK? or ?NG?.
ABS actuator and electric unit (control unit) part number can be read. ?