Nissan 350Z Workshop Maunual 2004 (9) PDF | Page 40

BRC-40
[ABS]
ABS ACTUATOR AND ELECTRIC UNIT (ASSEMBLY)
Revision: 2004 December 2004.5 350Z
ABS ACTUATOR AND ELECTRIC UNIT (ASSEMBLY) PFP:47660
Removal and Installation AFS0029N
Pay attention to the following when removing actuator.
CAUTION:
? Before servicing, disconnect battery cables.
? To remove brake tube, use flare nut wrench to prevent flare nuts and brake tube from being dam-
aged. To install, use flare nut wrench (commercial service tool).
? Do not remove and install actuator by holding harness.
? After work is completed, bleed air from brake piping. Refer to BR-10, "Bleeding Brake System" .
? Be sure to securely connect the ground cable.
SFIA0631E