Nissan 350Z Workshop Maunual 2005 (15) PDF | Page 105

CAMSHAFT
EM-105
C
D
E
F
G
H
I
J
K
L
M
A
EM
Revision: 2005 August 2005 350Z
Camshaft Cam Height
1. Measure the camshaft cam height with a micrometer.
2. If wear is beyond the limit, replace camshaft.
Camshaft Journal Oil Clearance
CAMSHAFT JOURNAL DIAMETER
? Measure the outer diameter of camshaft journal with a microme-
ter.
CAMSHAFT BRACKET INNER DIAMETER
? Tighten camshaft bracket bolt with the specified torque. Refer to EM-107, "INSTALLATION" for the tight-
ening procedure.
? Measure the inner diameter ?A? of camshaft bracket with a bore
gauge.
CAMSHAFT JOURNAL OIL CLEARANCE
? (Oil clearance) = (Camshaft bracket inner diameter) ? (Camshaft journal diameter)
Standard cam height:
Intake
Except for 35
th
Anniversary
: 44.865 - 45.055 mm (1.7663 - 1.7738 in)
For 35
th
Anniversary
: 45.865 - 46.055 mm (1.8057 - 1.8132 in)
Exhaust
Except for 35
th
Anniversary
: 44.865 - 45.055 mm (1.7663 - 1.7738 in)
For 35
th
Anniversary
: 45.875 - 46.055 mm (1.8061 - 1.8136 in)
Cam wear limit
: 0.2 mm (0.008 in)
EMQ0072D
Standard:
No. 1 : 25.935 - 25.955 mm (1.0211 - 1.0218 in)
No. 2, 3, 4 : 23.445 - 23.465 mm (0.9230 - 0.9238 in)
PBIC0040E
Standard:
No. 1 : 26.000 - 26.021 mm (1.0236 - 1.0244 in)
No. 2, 3, 4 : 23.500 - 23.521 mm (0.9252 - 0.9260 in)
PBIC1645E
Standard:
No. 1 : 0.045 - 0.086 mm (0.0018 - 0.0034 in)
No. 2, 3, 4 : 0.035 - 0.076 mm (0.0014 - 0.0030 in)
Limit : 0.15 mm (0.0059 in)

Summary of Content

CAMSHAFTEM-105CDEFGHIJKLMAEMRevision: 2005 August 2005 350ZCamshaft Cam Height1. Measure the camshaft cam height with a micrometer.2. If wear is beyond the limit, replace camshaft.Camshaft Journal Oil ClearanceCAMSHAFT JOURNAL DIAMETER Measure the outer diameter of camshaft journal with a microme-ter.CAMSHAFT BRACKET INNER DIAMETER Tighten camshaft bracket bolt with the specified torque. Refer to EM-107, "INSTALLATION" for the tight-ening procedure. Measure the inner diameter A of camshaft bracket with a boregauge.CAMSHAFT JOURNAL OIL CLEARANCE (Oil clearance) = (Camshaft bracket inner diameter) (Camshaft journal diameter)Standard cam height:IntakeExcept for 35th Anniversary: 44.865 - 45.055 mm (1.7663 - 1.7738 in)For 35th Anniversary: 45.865 - 46.055 mm (1.8057 - 1.8132 in)ExhaustExcept for 35th Anniversary: 44.865 - 45.055 mm (1.7663 - 1.7738 in)For 35th Anniversary: 45.875 - 46.055 mm (1.8061 - 1.8136 in)Cam wear limit: 0.2 mm (0.008 in)EMQ0072DStandard:No. 1 : 25.935 - 25.955 mm (1.0211 - 1.0218 in)No. 2, 3, 4 : 23.445 - 23.465 mm (0.9230 - 0.9238 in)PBIC0040EStandard:No. 1 : 26.000 - 26.021 mm (1.0236 - 1.0244 in)No. 2, 3, 4 : 23.500 - 23.521 mm (0.9252 - 0.9260 in)PBIC1645EStandard:No. 1 : 0.045 - 0.086 mm (0.0018 - 0.0034 in)No. 2, 3, 4 : 0.035 - 0.076 mm (0.0014 - 0.0030 in)Limit : 0.15 mm (0.0059 in)