Nissan 350Z Workshop Maunual 2005 (15) PDF | Page 20

EM-20
INTAKE MANIFOLD COLLECTOR
Revision: 2005 August 2005 350Z
9. Loosen mounting bolts with power tool in reverse order as
shown in the figure to remove intake manifold collector (upper).
10. Remove PCV hose [between intake manifold collector (lower) and rocker cover (right bank)].
11. Loosen mounting bolts with power tool in reverse order as
shown in the figure, and remove the intake manifold collector
cover, gasket, intake manifold collector (lower) and gasket.
CAUTION:
Cover engine openings to avoid entry of foreign materials.
INSPECTION AFTER REMOVAL
Surface Distortion
? Check the surface distortion of both the intake manifold collector
(upper and lower) mating surfaces with straightedge and feeler
gauge.
? If it exceeds the limit, replace intake manifold collector (upper
and/or lower).
PBIC1094E
PBIC0774E
Limit : 0.1 mm (0.004 in)
PBIC0775E

Nissan 350Z Workshop Maunual 2005 (15) Summary of Content

EM-20INTAKE MANIFOLD COLLECTORRevision: 2005 August 2005 350Z9. Loosen mounting bolts with power tool in reverse order asshown in the figure to remove intake manifold collector (upper).10. Remove PCV hose [between intake manifold collector (lower) and rocker cover (right bank)].11. Loosen mounting bolts with power tool in reverse order asshown in the figure, and remove the intake manifold collectorcover, gasket, intake manifold collector (lower) and gasket.CAUTION:Cover engine openings to avoid entry of foreign materials.INSPECTION AFTER REMOVALSurface Distortion Check the surface distortion of both the intake manifold collector(upper and lower) mating surfaces with straightedge and feelergauge. If it exceeds the limit, replace intake manifold collector (upperand/or lower).PBIC1094EPBIC0774ELimit : 0.1 mm (0.004 in)PBIC0775E