Nissan 350Z Workshop Maunual 2005 (15) PDF | Page 90

EM-90
TIMING CHAIN
Revision: 2005 August 2005 350Z
INSTALLATION
NOTE:
? The below figure shows the relationship between the mating mark on each timing chain and that on the
corresponding sprocket, with the components installed.
? In this figure, the drum of exhaust side camshaft sprocket has been omitted.
1. Install timing chain tensioners (secondary) to cylinder head as follows if removed. Refer to EM-107,
"INSTALLATION" .
a. Install timing chain tensioners (secondary) with stopper pin attached and new O-ring.
b. Install camshaft brackets (No. 1). Refer to EM-107, "
INSTALLATION" .
2. Install rear timing chain case as follows:
a. Install new O-rings onto cylinder block.
PBIC3590E
PBIC0788E

Nissan 350Z Workshop Maunual 2005 (15) Summary of Content

EM-90TIMING CHAINRevision: 2005 August 2005 350ZINSTALLATIONNOTE: The below figure shows the relationship between the mating mark on each timing chain and that on thecorresponding sprocket, with the components installed. In this figure, the drum of exhaust side camshaft sprocket has been omitted.1. Install timing chain tensioners (secondary) to cylinder head as follows if removed. Refer to EM-107,"INSTALLATION" .a. Install timing chain tensioners (secondary) with stopper pin attached and new O-ring.b. Install camshaft brackets (No. 1). Refer to EM-107, "INSTALLATION" .2. Install rear timing chain case as follows:a. Install new O-rings onto cylinder block.PBIC3590EPBIC0788E