Nissan 350Z Workshop Maunual 2005 (28) PDF | Page 22

MA-22
CHASSIS AND BODY MAINTENANCE
Revision: 2005 August 2005 350Z
CHASSIS AND BODY MAINTENANCE PFP:00100
Checking Exhaust System ALS000ND
Check exhaust pipes, muffler and mounting for improper attachment,
leaks, cracks, damage, chafing or deterioration.
? If anything is found, repair or replace damaged parts.
Checking Clutch Fluid Level and Leaks ALS000NE
If fluid level is extremely low, check clutch system for leaks.
Checking M/T Oil ALS000NF
Check for oil leakage.
(For details, refer to MT-9, "
Checking" .)
Changing M/T Oil ALS000NG
1. Drain oil from drain plug and refill with new gear oil.
(For details, refer to MT-9, "
Replacement" .)
2. Check oil level.
CAUTION:
Do not reuse gasket.
Checking A/T Fluid ALS000QI
1. Warm up engine.
2. Check for fluid leakage.
3. Loosen the level gauge bolt.
4. Before driving, fluid level can be checked at fluid temperatures of 30 to 50C (86 to 122F) using ?COLD?
range on A/T fluid level gauge as follows.
a. Park vehicle on level surface and set parking brake.
b. Start engine and move selector lever through each gear position. Leave selector lever in ?P? position.
c. Check fluid level with engine idling.
SMA211A
SMA941B
Oil grade and
viscosity:
Refer to MA-12, "RECOMMENDED FLU-
IDS AND LUBRICANTS" .
Oil capacity:
Approx. 2.9 (3-1/8 US qt, 2-1/2 lmp qt)
Filler plug and drain plug:
: 34.5 Nm (3.5 kg-m, 25 ft-lb)

Summary of Content

MA-22CHASSIS AND BODY MAINTENANCERevision: 2005 August 2005 350ZCHASSIS AND BODY MAINTENANCE PFP:00100Checking Exhaust System ALS000NDCheck exhaust pipes, muffler and mounting for improper attachment,leaks, cracks, damage, chafing or deterioration. If anything is found, repair or replace damaged parts.Checking Clutch Fluid Level and Leaks ALS000NEIf fluid level is extremely low, check clutch system for leaks.Checking M/T Oil ALS000NFCheck for oil leakage.(For details, refer to MT-9, "Checking" .)Changing M/T Oil ALS000NG1. Drain oil from drain plug and refill with new gear oil.(For details, refer to MT-9, "Replacement" .)2. Check oil level.CAUTION:Do not reuse gasket.Checking A/T Fluid ALS000QI1. Warm up engine.2. Check for fluid leakage.3. Loosen the level gauge bolt.4. Before driving, fluid level can be checked at fluid temperatures of 30 to 50C (86 to 122F) using COLDrange on A/T fluid level gauge as follows.a. Park vehicle on level surface and set parking brake.b. Start engine and move selector lever through each gear position. Leave selector lever in P position.c. Check fluid level with engine idling.SMA211ASMA941BOil grade and viscosity:Refer to MA-12, "RECOMMENDED FLU-IDS AND LUBRICANTS" .Oil capacity:Approx. 2.9 (3-1/8 US qt, 2-1/2 lmp qt)Filler plug and drain plug: : 34.5 Nm (3.5 kg-m, 25 ft-lb)