IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM)
Revision: 2005 August 2005 350Z
Inspection With CONSULT-II (Self-Diagnosis) AKS00A2Q
If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be
detected in self-diagnosis depending on control unit which carry out CAN communication.
1. CHECK SELF DIAGNOSTIC RESULT
1. Connect CONSULT-II and select ?IPDM E/R? on the Diagnosis System Selection screen.
2. Select ?SELF-DIAG RESULTS? on the ?SELECT DIAG MODE? screen.
3. Check display content in self diagnostic results.
The details for display of the period are as follows:
? CRNT: Error currently detected with IPDM E/R.
? PAST: Error detected in the past and memorized with IPDM E/R.
NO DTC IS DETECTED.FURTHER TESTING MAY BE REQUIRED.>>INSPECTION END
CAN COMM CIRC>>After print-out of the monitor items, refer to LAN-3, "
Precautions When Using CON-
Details of diagnosis result
NO DTC IS DETECTED.
FURTHER TESTING MAY BE REQUIRED.
- - - No malfunction
CAN COMM CIRC U1000 ××
Any of or several items below have errors.
? TRANSMIT DIAG