Nissan 350Z Workshop Maunual 2005 (39) PDF | Page 30

SC-30
CHARGING SYSTEM
Revision: 2005 August 2005 350Z
9. Disconnect alternator connector.
10. Remove ?B? terminal mounting nut.
11. Remove harness clip and water hose bracket from alternator.
12. Remove alternator downward from the vehicle.
ALTERNATOR PULLEY INSPECTION
Perform the following.
? Make sure that alternator pulley does not rattle.
? Make sure that alternator pulley nut is tight.
INSTALLATION
Installation is the reverse order of removal.
? Install alternator, and check tension of belt. Refer to EM-14, "Checking Drive Belts" .
CAUTION:
Be sure to tighten ?B? terminal nut carefully.
PKIA1924E
Alternator pulley nut:
: 118 Nm (12.0 kg-m, 87 ft-lb)

Nissan 350Z Workshop Maunual 2005 (39) Summary of Content

SC-30CHARGING SYSTEMRevision: 2005 August 2005 350Z9. Disconnect alternator connector.10. Remove B terminal mounting nut.11. Remove harness clip and water hose bracket from alternator.12. Remove alternator downward from the vehicle.ALTERNATOR PULLEY INSPECTIONPerform the following. Make sure that alternator pulley does not rattle. Make sure that alternator pulley nut is tight.INSTALLATION Installation is the reverse order of removal. Install alternator, and check tension of belt. Refer to EM-14, "Checking Drive Belts" .CAUTION:Be sure to tighten B terminal nut carefully.PKIA1924EAlternator pulley nut: : 118 Nm (12.0 kg-m, 87 ft-lb)