Nissan 350Z Workshop Maunual 2005 (39) PDF | Page 32

SC-32
SERVICE DATA AND SPECIFICATIONS (SDS)
Revision: 2005 August 2005 350Z
SERVICE DATA AND SPECIFICATIONS (SDS) PFP:00030
Battery AKS00992
Starter AKS00993
Alternator AKS00994
Type 80D23L
Capacity 12 V - 52AH
Cold cranking current (For reference value) 589A
Type
S114-880
HITACHI make
Reduction gear type
System voltage 12 V
No-load
Terminal voltage 11 V
Current Less than 90A
Revolution More than 2,880 rpm
Minimum diameter of commutator 28.0 mm (1.102 in)
Minimum length of brush 10.5 mm (0.413 in)
Brush spring tension 16.2 N (1.65 kg, 3.6 lb)
Clearance between bearing metal and armature shaft Less than 0.2 mm (0.008 in)
Movement in height of pinion assembly 0.3 - 2.5 mm (0.012 - 0.098 in)
Type
A3TG0191
MITSUBISHI make
Nominal rating 12 V - 110A
Ground polarity Negative
Minimum revolution under no-load (When 13.5V is applied) Less than 1,000 rpm
Hot output current (When 13.5V is applied)
More than 37A/1,300 rpm
More than 92A/2,500 rpm
More than 103A/5,000 rpm
Regulated output voltage 14.1 - 14.7 V
Minimum length of brush More than 5.00 mm (0.197 in)
Brush spring pressure 4.9 - 6.1 N (499 - 622 g, 17.62 - 21.94 oz)
Slip ring minimum outer diameter More than 22.1 mm (0.870 in)
Rotor (Field coil) resistance 1.7 - 2.1 ?