TROUBLE DIAGNOSES WORK FLOW
Revision: 2005 August 2006 350Z
CAN Diagnostic Support Monitor NKS000A1
DESCRIPTION OF ?CAN DIAG SUPPORT MNTR? SCREEN FOR ECM
Display Results (Present)
? OK: Normal
? UNKWN: The diagnosed unit does not transmit or receive the applicable data normally.
? ?: There is no received unit or the unit is not in the condition that reception diagnosis is performed.
Display Results (Past)
? OK: Normal
? 0: There is malfunction now.
? 1 ? 39: Displays when it is normal at present and finds malfunction in the past. It increases like 0?1?2...38?39 after returning to the
normal condition whenever IGN OFF?ON. If it is over 39, it is fixed to 39 until the self-diagnostic results are erased. It returns to 0
when malfunction is detected again in the process.
? ?: Undiagnosed
?CAN DIAG SUPPORT
Description Present Past
TRANSMIT DIAG Make sure of normal transmission. OK/UNKWN/?
OK/0/1 ? 39/?
Make sure of normal reception from VDC/TCS/
ABS control unit.
Make sure of normal reception from ABS actu-
ator and electric unit (control unit).
Make sure of normal reception from unified
meter and A/C amp.
BCM/SEC Make sure of normal reception from BCM. OK/UNKWN/?
ICC ICC is not diagnosed. ?
HVAC HVAC is not diagnosed. ?
TCM Make sure of normal reception from TCM. OK/UNKWN/?
EPS EPS is not diagnosed. ?
IPDM E/R Make sure of normal reception from IPDM E/R. OK/UNKWN/?
e4WD e4WD is not diagnosed. ?
AWD/4WD AWD/4WD is not diagnosed. ?