TROUBLE DIAGNOSES WORK FLOW
Revision: 2005 August 2006 350Z
DESCRIPTION OF ?CAN DIAG SUPPORT MNTR? SCREEN FOR UNIFIED METER AND A/C
Display Results (Present)
? OK: Normal
? UNKWN: The diagnosed unit does not transmit or receive the applicable data normally.
? ?: There is no received unit or the unit is not in the condition that reception diagnosis is performed.
Display Results (Past)
? OK: Normal
? 0: There is malfunction now.
? 1 ? 39: Displays when it is normal at present and finds malfunction in the past. It increases like 0?1?2...38?39 after returning to the
normal condition whenever IGN OFF?ON. If it is over 39, it is fixed to 39 until the self-diagnostic results are erased. It returns to 0
when malfunction is detected again in the process.
? ?: Undiagnosed
?CAN DIAG SUPPORT
Description Present Past
METER A/C AMP
TRANSMIT DIAG Make sure of normal transmission. OK/UNKWN/?
OK/0/1 ? 39/?
ECM Make sure of normal reception from ECM. OK/UNKWN/?
TCM Make sure of normal reception from TCM. OK/UNKWN/?
BCM/SEC Make sure of normal reception from BCM. OK/UNKWN/?
Make sure of normal reception from VDC/TCS/
ABS control unit.
Make sure of normal reception from ABS actuator
and electric unit (control unit).
IPDM E/R IPDM E/R is not diagnosed. ?
DISPLAY DISPLAY is not diagnosed. ?
I-KEY I-KEY is not diagnosed. ?
EPS EPS is not diagnosed. ?
AWD/4WD AWD/4WD is not diagnosed. ?
e4WD e4WD is not diagnosed. ?
ICC ICC is not diagnosed. ?
LANE KEEP LANE KEEP is not diagnosed. ?
TIRE-P Not available for CAN system diagnosis. OK/UNKWN