Revision: 2005 August 2006 350Z
CAN COMMUNICATION PFP:23710
System Description NKS000A2
CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle mul-
tiplex communication line with high data communication speed and excellent error detection ability. Many elec-
tronic control units are equipped onto a vehicle, and each control unit shares information and links with other
control units during operation (not independent). In CAN communication, control units are connected with 2
communication lines (CAN H line, CAN L line) allowing a high rate of information transmission with less wiring.
Each control unit transmits/receives data but selectively reads required data only.
Component Parts and Harness Connector Location NKS002AO
1. TCM F6 2. ECM F101 3. IPDM E/R E9
4. Unified meter and A/C amp. M48 5. Steering angle sensor M22 (with
6. ABS actuator and electric unit (con-
trol unit) E51 (with ABS and TCS)
7. BCM M90 8. Data link connector M8 9. VDC/TCS/ABS control unit E118