Nissan 350Z Workshop Maunual 2006 (25) PDF | Page 94

LAN-94
[CAN]
TROUBLE DIAGNOSIS FOR SYSTEM
Revision: 2005 August 2006 350Z
TROUBLE DIAGNOSIS FOR SYSTEM PFP:00000
Inspection Between TCM and Data Link Connector Circuit NKS002AR
1. CHECK CONNECTOR
1. Turn ignition switch OFF.
2. Disconnect the battery cable from the negative terminal.
3. Check following terminals and connectors for damage, bend and loose connection (connector side and
harness side).
? Harness connector F102
? Harness connector M72
OK or NG
OK >> GO TO 2.
NG >> Repair terminal or connector.
2. CHECK HARNESS FOR OPEN CIRCUIT
1. Disconnect A/T assembly connector and harness connector F102.
2. Check continuity between A/T assembly harness connector and
harness connector.
OK or NG
OK >> GO TO 3.
NG >> Repair harness.
3. CHECK HARNESS FOR OPEN CIRCUIT
Check continuity between harness connector and data link connec-
tor.
OK or NG
OK >> Connect all the connectors and diagnose again. Refer to
LAN-5, "
TROUBLE DIAGNOSES WORK FLOW" .
NG >> Repair harness.
A/T assembly
connector
Terminal
SMJ harness
connector
Terminal Continuity
F6
3
F102
26H
Yes
8 27H
PKIA2070E
SMJ harness
connector
Terminal
Data link con-
nector
Terminal Continuity
M72
26H
M8
6
Yes
27H 14
PKIA2071E