Nissan 350Z Workshop Maunual 2006 (9) PDF | Page 101

TROUBLE DIAGNOSIS
BRC-101
[VDC/TCS/ABS]
C
D
E
G
H
I
J
K
L
M
A
B
BRC
Revision: 2005 August 2006 350Z
CONSULT-II BASIC OPERATION PROCEDURE
1. Turn ignition switch OFF.
2. Connect CONSULT-II and CONSULT-II CONVERTER to the
data link connector.
CAUTION:
If CONSULT-II is used with no connection of CONSULT-II
CONVERTER, malfunctions might be detected in self-diag-
nosis depending on control unit which carry out CAN com-
munication.
3. Turn ignition switch ON.
4. Touch ?START (NISSAN BASED VHCL)?.
5. Touch ?ABS? in the ?SELECT SYSTEM? screen.
If ?ABS? is not indicated, go to GI-39, "
CONSULT-II Data Link
Connector (DLC) Circuit" .
6. Select the required diagnostic location from the ?SELECT SYS-
TEM? screen.
For further information, see the CONSULT-II Operation Manual.
PBIB1069E
SKIA3098E
BCIA0030E
BCIA0031E

Nissan 350Z Workshop Maunual 2006 (9) Summary of Content

TROUBLE DIAGNOSISBRC-101[VDC/TCS/ABS]CDEGHIJKLMABBRCRevision: 2005 August 2006 350ZCONSULT-II BASIC OPERATION PROCEDURE1. Turn ignition switch OFF.2. Connect CONSULT-II and CONSULT-II CONVERTER to thedata link connector.CAUTION:If CONSULT-II is used with no connection of CONSULT-IICONVERTER, malfunctions might be detected in self-diag-nosis depending on control unit which carry out CAN com-munication.3. Turn ignition switch ON.4. Touch START (NISSAN BASED VHCL).5. Touch ABS in the SELECT SYSTEM screen.If ABS is not indicated, go to GI-39, "CONSULT-II Data LinkConnector (DLC) Circuit" .6. Select the required diagnostic location from the SELECT SYS-TEM screen.For further information, see the CONSULT-II Operation Manual.PBIB1069ESKIA3098EBCIA0030EBCIA0031E