Nissan 350Z Workshop Maunual 2006 (9) PDF | Page 105

TROUBLE DIAGNOSIS
BRC-105
[VDC/TCS/ABS]
C
D
E
G
H
I
J
K
L
M
A
B
BRC
Revision: 2005 August 2006 350Z
Data Monitor NFS000HL
OPERATION PROCEDURE
1. After turning OFF the ignition switch, connect CONSULT-II and the CONVERTER to the data link connec-
tor.
CAUTION:
If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be
detected in self-diagnosis depending on control unit which carry out CAN communication.
2. Touch ?START (NISSAN BASED VHCL)?, ?ABS?, ?DATA MONITOR? in order on the CONSULT-II screen.
If ?ABS? is not indicated, go to GI-39, "
CONSULT-II Data Link Connector (DLC) Circuit" .
CAUTION:
When ?START (NISSAN BASED VHCL)? is touched immediately after starting the engine or turning
on the ignition switch, ?ABS? might not be displayed in the ?SELECT SYSTEM? screen. In this
case, repeat the operation from step 2.
3. Return to the ?SELECT MONITOR ITEM? screen, and touch ?ECU INPUT SIGNALS?, ?MAIN SIGNALS?
or ?SELECTION FROM MENU?. Refer to the following information.
4. When ?START? is touched, the data monitor screen is displayed.
DISPLAY ITEM LIST
Item (Unit)
SELECT MONITOR ITEM
Remarks
ECU INPUT
SIGNALS
MAIN
SIGNALS
SELECTION
FROM MENU
FR LH SENSOR
[km/h (MPH)]
xx x
Wheel speed calculated by front LH wheel sen-
sor signal is displayed.
FR RH SENSOR
[km/h (MPH)]
xx x
Wheel speed calculated by front RH wheel sen-
sor signal is displayed.
RR RH SENSOR
[km/h (MPH)]
xx x
Wheel speed calculated by Rear RH wheel
sensor signal is displayed.
RR LH SENSOR
[km/h (MPH)]
xx x
Wheel speed calculated by Rear LH wheel sen-
sor signal is displayed.
FR LH IN SOL
(ON/OFF)
?x x
Front left inlet ABS solenoid valve (ON/OFF)
status is displayed.
FR LH OUT SOL
(ON/OFF)
?x x
Front left outlet ABS solenoid valve (ON/OFF)
status is displayed.
RR RH IN SOL
(ON/OFF)
?x x
Rear right inlet ABS solenoid valve (ON/OFF)
status is displayed.
RR RH OUT SOL
(ON/OFF)
?x x
Rear right outlet ABS solenoid valve (ON/OFF)
status is displayed.
FR RH IN SOL
(ON/OFF)
?x x
Front right inlet ABS solenoid valve (ON/OFF)
status is displayed.
FR RH OUT SOL
(ON/OFF)
?x x
Front right outlet ABS solenoid valve (ON/OFF)
status is displayed.
RR LH IN SOL
(ON/OFF)
?x x
Rear left inlet ABS solenoid valve (ON/OFF)
status is displayed.
RR LH OUT SOL
(ON/OFF)
?x x
Rear left outlet ABS solenoid valve (ON/OFF)
status is displayed.
STOP LAMP SW
(ON/OFF)
x x x Stop lamp switch (ON/OFF) status is displayed.
MOTOR RELAY
(ON/OFF)
?x x
ABS motor relay (ON/OFF) condition is dis-
played.
ACTUATOR REL
(ON/OFF)
?x x
ABS actuator relay (ON/OFF) status is dis-
played.
ABS WARN LAMP
(ON/OFF)
?x x
ABS warning lamp (ON/OFF) status is dis-
played.
OFF LAMP
(ON/OFF)
?x x
VDC OFF indicator lamp (ON/OFF) status is
displayed.

Nissan 350Z Workshop Maunual 2006 (9) Summary of Content

TROUBLE DIAGNOSISBRC-105[VDC/TCS/ABS]CDEGHIJKLMABBRCRevision: 2005 August 2006 350ZData Monitor NFS000HLOPERATION PROCEDURE1. After turning OFF the ignition switch, connect CONSULT-II and the CONVERTER to the data link connec-tor.CAUTION:If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might bedetected in self-diagnosis depending on control unit which carry out CAN communication.2. Touch START (NISSAN BASED VHCL), ABS, DATA MONITOR in order on the CONSULT-II screen.If ABS is not indicated, go to GI-39, "CONSULT-II Data Link Connector (DLC) Circuit" .CAUTION:When START (NISSAN BASED VHCL) is touched immediately after starting the engine or turningon the ignition switch, ABS might not be displayed in the SELECT SYSTEM screen. In thiscase, repeat the operation from step 2.3. Return to the SELECT MONITOR ITEM screen, and touch ECU INPUT SIGNALS, MAIN SIGNALSor SELECTION FROM MENU. Refer to the following information.4. When START is touched, the data monitor screen is displayed.DISPLAY ITEM LISTItem (Unit)SELECT MONITOR ITEMRemarksECU INPUT SIGNALSMAIN SIGNALSSELECTION FROM MENUFR LH SENSOR [km/h (MPH)]xx xWheel speed calculated by front LH wheel sen-sor signal is displayed.FR RH SENSOR [km/h (MPH)]xx xWheel speed calculated by front RH wheel sen-sor signal is displayed.RR RH SENSOR [km/h (MPH)]xx xWheel speed calculated by Rear RH wheel sensor signal is displayed.RR LH SENSOR [km/h (MPH)]xx xWheel speed calculated by Rear LH wheel sen-sor signal is displayed.FR LH IN SOL (ON/OFF)x xFront left inlet ABS solenoid valve (ON/OFF) status is displayed.FR LH OUT SOL (ON/OFF)x xFront left outlet ABS solenoid valve (ON/OFF) status is displayed.RR RH IN SOL (ON/OFF)x xRear right inlet ABS solenoid valve (ON/OFF) status is displayed.RR RH OUT SOL (ON/OFF)x xRear right outlet ABS solenoid valve (ON/OFF) status is displayed.FR RH IN SOL (ON/OFF)x xFront right inlet ABS solenoid valve (ON/OFF) status is displayed.FR RH OUT SOL (ON/OFF)x xFront right outlet ABS solenoid valve (ON/OFF) status is displayed.RR LH IN SOL (ON/OFF)x xRear left inlet ABS solenoid valve (ON/OFF) status is displayed.RR LH OUT SOL (ON/OFF)x xRear left outlet ABS solenoid valve (ON/OFF) status is displayed.STOP LAMP SW (ON/OFF)x x x Stop lamp switch (ON/OFF) status is displayed.MOTOR RELAY (ON/OFF)x xABS motor relay (ON/OFF) condition is dis-played. ACTUATOR REL (ON/OFF)x xABS actuator relay (ON/OFF) status is dis-played.ABS WARN LAMP (ON/OFF)x xABS warning lamp (ON/OFF) status is dis-played.OFF LAMP (ON/OFF)x xVDC OFF indicator lamp (ON/OFF) status is displayed.