Revision: 2005 August 2006 350Z
? Approximately 10 seconds after the operation is begun, ?TEST STOP? will be displayed.
? To conduct a retest after ?TEST STOP? is displayed, touch ?BACK? and conduct the test from the step 6.
The example shown is for the front right wheel. The procedure for the other wheels is the same as
? When conducting an active test of the ABS function, select the main item for each test item. In addition,
when conducting an active test of the VDC/TCS function, select the item menu for each test item.
? For the ABS solenoid valve, touch ?UP?, ?KEEP?, ?DOWN? on the display screen.
For the ABS solenoid valve (ACT), touch ?UP?, ?ACT UP?, ?ACT
KEEP? and confirm that the solenoid valves (in, out, USV, HSV)
operate as shown in the table below.
*: ON for 1 to 2 seconds after the touch, and then OFF
Touch ?ON?, ?OFF? on the display screen and make sure the ABS
motor relay is operating as shown in the table below.
ABS solenoid valve ABS solenoid valve (ACT)
UP KEEP DOWN UP ACT UP ACT KEEP
FR RH IN SOL OFF ON ON OFF OFF OFF
FR RH OUT SOL OFF OFF ON* OFF OFF OFF
USV [FR - RL] OFF OFF OFF OFF ON ON
HSV [FR - RR] OFF OFF OFF OFF ON* OFF
Operation ON OFF
MOTOR RELAY ON OFF
ACTUATOR RLY ON ON