Nissan 350Z Workshop Maunual 2006 (9) PDF | Page 22

BRC-22
[ABS]
TROUBLE DIAGNOSIS
Revision: 2005 August 2006 350Z
Note 2: When errors are detected in several systems, including the CAN communication system [U1000], troubleshoot the CAN commu-
nication system.
Data Monitor NFS000HE
OPERATION PROCEDURE
1. After turning OFF the ignition switch, connect CONSULT-II and the CONVERTER to the data link connec-
tor.
CAUTION:
If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be
detected in self-diagnosis depending on control unit which carry out CAN communication.
2. Touch ?START (NISSAN BASED VHCL)?, ?ABS?, ?DATA MONITOR? in order on the CONSULT-II screen.
If ?ABS? is not indicated, go to GI-39, "
CONSULT-II Data Link Connector (DLC) Circuit" .
CAUTION:
When ?START (NISSAN BASED VHCL)? is touched immediately after starting the engine or turning
on the ignition switch, ?ABS? might not be displayed in the ?SELECT SYSTEM? screen. In this
case, repeat the operation from step 2.
3. Return to the ?SELECT MONITOR ITEM? screen, and touch ?ECM INPUT SIGNALS?, ?MAIN SIGNALS?
or ?SELECTION FROM MENU?. Refer to the following information.
4. When ?START? is touched, the data monitor screen is displayed.
DISPLAY ITEM LIST
Item (Unit)
SELECT MONITOR ITEM
Remarks
ECM INPUT
SIGNALS
MAIN SIGNALS
SELECTION
MENU
FR LH SENSOR
[km/h (MPH)]
Wheel speed calculated by front LH wheel sensor sig-
nal is displayed.
FR LH SENSOR
[km/h (MPH)]
Wheel speed calculated by front RH wheel sensor sig-
nal is displayed.
RR LH SENSOR
[km/h (MPH)]
Wheel speed calculated by rear LH wheel sensor signal
is displayed.
RR RH SENSOR
[km/h (MPH)]
Wheel speed calculated by rear RH wheel sensor sig-
nal is displayed.
FR LH IN SOL
(ON/OFF)
?
Front left inlet ABS solenoid valve (ON/OFF) status is
displayed.
FR LH OUT SOL
(ON/OFF)
?
Front left outlet ABS solenoid valve (ON/OFF) status is
displayed.
RR RH IN SOL
(ON/OFF)
?
Rear right inlet ABS solenoid valve (ON/OFF) status is
displayed.
RR RH OUT SOL
(ON/OFF)
?
Rear right outlet ABS solenoid valve (ON/OFF) status
is displayed.
FR RH IN SOL
(ON/OFF)
?
Front right inlet ABS solenoid valve (ON/OFF) status is
displayed.
FR RH OUT SOL
(ON/OFF)
?
Front right outlet ABS solenoid valve (ON/OFF) status
is displayed.
RR LH IN SOL
(ON/OFF)
?
Rear left wheel inside ABS solenoid valve (ON/OFF)
status is displayed.
RR LH OUT SOL
(ON/OFF)
?
Rear left outlet ABS solenoid valve (ON/OFF) status is
displayed.
EBD WARN LAMP
(ON/OFF)
? Brake warning lamp (ON/OFF) status is displayed.
STOP LAMP SW
(ON/OFF)
Stop lamp switch (ON/OFF) status is displayed.
MOTOR RELAY
(ON/OFF)
? ABS motor relay (ON/OFF) condition is displayed.
ACTUATOR RLY
(ON/OFF)
? ABS actuator relay (ON/OFF) status is displayed.

Summary of Content

BRC-22[ABS]TROUBLE DIAGNOSISRevision: 2005 August 2006 350ZNote 2: When errors are detected in several systems, including the CAN communication system [U1000], troubleshoot the CAN commu-nication system.Data Monitor NFS000HEOPERATION PROCEDURE1. After turning OFF the ignition switch, connect CONSULT-II and the CONVERTER to the data link connec-tor.CAUTION:If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might bedetected in self-diagnosis depending on control unit which carry out CAN communication.2. Touch START (NISSAN BASED VHCL), ABS, DATA MONITOR in order on the CONSULT-II screen.If ABS is not indicated, go to GI-39, "CONSULT-II Data Link Connector (DLC) Circuit" .CAUTION:When START (NISSAN BASED VHCL) is touched immediately after starting the engine or turningon the ignition switch, ABS might not be displayed in the SELECT SYSTEM screen. In thiscase, repeat the operation from step 2.3. Return to the SELECT MONITOR ITEM screen, and touch ECM INPUT SIGNALS, MAIN SIGNALSor SELECTION FROM MENU. Refer to the following information.4. When START is touched, the data monitor screen is displayed.DISPLAY ITEM LISTItem (Unit)SELECT MONITOR ITEMRemarksECM INPUT SIGNALSMAIN SIGNALSSELECTION MENUFR LH SENSOR[km/h (MPH)]Wheel speed calculated by front LH wheel sensor sig-nal is displayed.FR LH SENSOR [km/h (MPH)]Wheel speed calculated by front RH wheel sensor sig-nal is displayed.RR LH SENSOR [km/h (MPH)]Wheel speed calculated by rear LH wheel sensor signal is displayed.RR RH SENSOR[km/h (MPH)]Wheel speed calculated by rear RH wheel sensor sig-nal is displayed.FR LH IN SOL(ON/OFF) Front left inlet ABS solenoid valve (ON/OFF) status is displayed.FR LH OUT SOL(ON/OFF) Front left outlet ABS solenoid valve (ON/OFF) status is displayed.RR RH IN SOL(ON/OFF) Rear right inlet ABS solenoid valve (ON/OFF) status is displayed.RR RH OUT SOL (ON/OFF) Rear right outlet ABS solenoid valve (ON/OFF) status is displayed.FR RH IN SOL (ON/OFF) Front right inlet ABS solenoid valve (ON/OFF) status is displayed.FR RH OUT SOL(ON/OFF) Front right outlet ABS solenoid valve (ON/OFF) status is displayed.RR LH IN SOL (ON/OFF) Rear left wheel inside ABS solenoid valve (ON/OFF) status is displayed.RR LH OUT SOL(ON/OFF) Rear left outlet ABS solenoid valve (ON/OFF) status is displayed.EBD WARN LAMP (ON/OFF) Brake warning lamp (ON/OFF) status is displayed.STOP LAMP SW (ON/OFF)Stop lamp switch (ON/OFF) status is displayed.MOTOR RELAY(ON/OFF) ABS motor relay (ON/OFF) condition is displayed.ACTUATOR RLY(ON/OFF) ABS actuator relay (ON/OFF) status is displayed.