Subaru Forester AutomaticTransmission 1999 2000 (34) PDF

6) Install snap pin to range select lever.
B3M1029C
(A) Snap pin
(B) Select cable
(C) Range select lever
7) Install front exhaust pipe. <Ref. to 2-9 [W1B0].>
8) Connect inhibitor switch connector.
B3M1028B
(A) Inhibitor switch
9) Install air cleaner case and duct. <Ref. to 2-7
[W1A0].>
3. Sensor (in transmission)
A: INSPECTION
1) Remove air cleaner case and duct. <Ref. to 2-7
[W1A0].>
2) Disconnect transmission connector.
S2M0212B
(A) Transmission harness connector
3) Check each sensor, solenoid and ground sys-
tem for short circuits.
S3M0039B
(A) Transmission connector
35
[W3A0] 3-2SERVICE PROCEDURE
3. Sensor (in transmission)

Subaru Forester AutomaticTransmission 1999 2000 (34) Summary of Content

6) Install snap pin to range select lever.B3M1029C(A) Snap pin(B) Select cable(C) Range select lever7) Install front exhaust pipe. Ref. to 2-9 [W1B0].8) Connect inhibitor switch connector.B3M1028B(A) Inhibitor switch9) Install air cleaner case and duct. Ref. to 2-7[W1A0].3. Sensor (in transmission)A: INSPECTION1) Remove air cleaner case and duct. Ref. to 2-7[W1A0].2) Disconnect transmission connector.S2M0212B(A) Transmission harness connector3) Check each sensor, solenoid and ground sys-tem for short circuits.S3M0039B(A) Transmission connector35[W3A0] 3-2SERVICE PROCEDURE3. Sensor (in transmission)