1. EVALUATION
NOTE:
If part is faulty, its resistance value will be different
from the standard value indicated.
Part name Terminal Resistance (?)
Vehicle speed sensor 1 17 ? 18 450 ? 650
Vehicle speed sensor 2 19 ? 20 450 ? 650
ATF temperature sensor 11 ? 12
2,100 ? 2,900/
20C (68F)
275 ? 375/
80C (176F)
Torque converter turbine
speed sensor
14 ? 15 450 ? 650
Shift solenoid 1 1 ? 16 10 ? 16
Shift solenoid 2 2 ? 16 10 ? 16
Line pressure duty solenoid 5 ? 16 2.0 ? 4.5
Lock-up duty solenoid 13 ? 16 10 ? 17
2-4 brake duty solenoid 9 ? 16 2.0 ? 4.5
Low clutch timing solenoid 3 ? 16 10 ? 16
2-4 brake timing solenoid 4 ? 16 10 ? 16
Transfer duty solenoid 6 ? 16 10 ? 17
4. Shift Solenoid, Duty
Solenoid and Valve
A: REMOVAL
1) Clean transmission exterior.
2) Drain ATF completely.
NOTE:
Tighten ATF drain plug after draining ATF.
Tightening torque:
25
2 Nm (2.5
0.2 kg-m, 18.1
1.4 ft-lb)
B3M1036B
(A) Oil pan
(B) Drain plug
(C) Differential oil drain plug
3) Remove oil pan.
NOTE:
Drain oil into a container.
4) Disconnect solenoid and sensor connectors.
Remove connectors from clip and disconnect con-
nectors at eight places.
B2M2263C
(A) Lock-up duty solenoid (Blue)
(B) Low clutch timing solenoid (Gray)
(C) Line pressure duty solenoid (Red)
(D) Shift solenoid 2 (Yellow)
(E) Shift solenoid 1 (Green)
(F) 2-4 brake timing solenoid (Black)
(G) 2-4 brake duty solenoid (Red)
(H) ATF temperature sensor
37
[W4A0] 3-2SERVICE PROCEDURE
4. Shift Solenoid, Duty Solenoid and Valve