Subaru Forester AutomaticTransmission 1999 2000 (36) PDF

7) Fill ATF up to the middle of the ?COLD? side
level gauge by using level gauge hole.
Recommended fluid:
Dexron II E or Dexron III type automatic
transmission fluid
Fluid capacity:
9.3 ? 9.6
?
(9.8 ? 10.1 US qt, 8.2 ? 8.4
Imp qt)
8) Run the vehicle until the ATF temperature rises
from 60 to 80C (140 to 176F) and check the ATF
level of the ?HOT? side on level gauge.
B3M1020B
(A) ATF level gauge
(B) Upper level
(C) Lower level
5. Transfer Duty Solenoid and
Transfer Valve Body
A: REMOVAL
1) Remove air cleaner case and chamber.
<Ref. to 2-7 [W1A0].>
B2M2320
2) Remove pitching stopper.
S2M0126
3) Raise vehicle and drain ATF.
B3M1036B
(A) Oil pan
(B) Drain plug
(C) Differential oil drain plug
40
3-2 [W5A0] SERVICE PROCEDURE
5. Transfer Duty Solenoid and Transfer Valve Body

Subaru Forester AutomaticTransmission 1999 2000 (36) Summary of Content

7) Fill ATF up to the middle of the COLD sidelevel gauge by using level gauge hole.Recommended fluid:Dexron II E or Dexron III type automatictransmission fluidFluid capacity:9.3 9.6(9.8 10.1 US qt, 8.2 8.4Imp qt)8) Run the vehicle until the ATF temperature risesfrom 60 to 80C (140 to 176F) and check the ATFlevel of the HOT side on level gauge.B3M1020B(A) ATF level gauge(B) Upper level(C) Lower level5. Transfer Duty Solenoid andTransfer Valve BodyA: REMOVAL1) Remove air cleaner case and chamber.Ref. to 2-7 [W1A0].B2M23202) Remove pitching stopper.S2M01263) Raise vehicle and drain ATF.B3M1036B(A) Oil pan(B) Drain plug(C) Differential oil drain plug403-2 [W5A0] SERVICE PROCEDURE5. Transfer Duty Solenoid and Transfer Valve Body