Subaru Forester AutomaticTransmission 1999 2000 (48) PDF

17. Drive Pinion Shaft
A: DISASSEMBLY
1) Straighten the staked portion of the lock nut,
and remove the lock nut while locking the rear
spline portion of the shaft with ST1 and ST2. Then
pull off the drive pinion collar.
ST1 498937110 HOLDER
ST2 499787700 WRENCH
ST3 499787500 ADAPTER
B3M0587A
2) Remove the O-ring.
3) Using a press, separate the rear roller bearing
and outer race from the shaft.
S3M0487
4) Using a press and ST, separate the front roller
bearing from the shaft.
ST 498517000 REPLACER
S3M0488A
B: INSPECTION
Make sure that all component parts are free of
harmful cuts, gouges, and other faults.
C: ASSEMBLY
1) Measure dimension ?A? of the drive pinion
shaft.
ST 398643600 GAUGE
B3M1176A
2) Using a press, force-fit the roller bearing in
position.
CAUTION:
Do not change the relative positions of the
outer race and bearing cone.
S3M0489A
(A) Drive pinion shaft
(B) Roller bearing
3) After fitting the O-ring to the shaft, attach the
drive pinion collar to the shaft.
CAUTION:
Be careful not to damage the O-ring.
91
[W17C0] 3-2SERVICE PROCEDURE
17. Drive Pinion Shaft

Subaru Forester AutomaticTransmission 1999 2000 (48) Summary of Content

17. Drive Pinion ShaftA: DISASSEMBLY1) Straighten the staked portion of the lock nut,and remove the lock nut while locking the rearspline portion of the shaft with ST1 and ST2. Thenpull off the drive pinion collar.ST1 498937110 HOLDERST2 499787700 WRENCHST3 499787500 ADAPTERB3M0587A2) Remove the O-ring.3) Using a press, separate the rear roller bearingand outer race from the shaft.S3M04874) Using a press and ST, separate the front rollerbearing from the shaft.ST 498517000 REPLACERS3M0488AB: INSPECTIONMake sure that all component parts are free ofharmful cuts, gouges, and other faults.C: ASSEMBLY1) Measure dimension A of the drive pinionshaft.ST 398643600 GAUGEB3M1176A2) Using a press, force-fit the roller bearing inposition.CAUTION:Do not change the relative positions of theouter race and bearing cone.S3M0489A(A) Drive pinion shaft(B) Roller bearing3) After fitting the O-ring to the shaft, attach thedrive pinion collar to the shaft.CAUTION:Be careful not to damage the O-ring.91[W17C0] 3-2SERVICE PROCEDURE17. Drive Pinion Shaft