Subaru Forester AutomaticTransmission 1999 2000 (51) PDF

19) Install the needle bearing, and secure with the
snap ring.
B3M1164B
(A) Snap ring
(B) Needle bearing
20) Install the one-way clutch, one-way clutch
inner race and plate, and secure with the snap ring.
NOTE:
Set the inner race. Make sure that the forward
clutch is free in the clockwise direction and locked
in the counterclockwise direction, as viewed from
the front of the vehicle.
B3M1175B
(A) Free
(B) Locked
20. Differential Case Assembly
A: DISASSEMBLY
1) Using a press and ST, remove the taper roller
bearing.
ST 498077000 REMOVER
G3M0488
2) Secure the case in a vise and remove the
crown gear tightening bolts, then separate the
crown gear, case (RH) and case (LH).
S3M0490A
(A) Crown gear
(B) Differential case (RH)
(C) Differential case (LH)
3) Pull out the straight pin and shaft, and remove
the differential bevel gear, washer, and differential
bevel pinion.
S3M0491
B: INSPECTION
Check each component for harmful cuts, damage
and other faults.
106
3-2 [W20A0] SERVICE PROCEDURE
20. Differential Case Assembly

Subaru Forester AutomaticTransmission 1999 2000 (51) Summary of Content

19) Install the needle bearing, and secure with thesnap ring.B3M1164B(A) Snap ring(B) Needle bearing20) Install the one-way clutch, one-way clutchinner race and plate, and secure with the snap ring.NOTE:Set the inner race. Make sure that the forwardclutch is free in the clockwise direction and lockedin the counterclockwise direction, as viewed fromthe front of the vehicle.B3M1175B(A) Free(B) Locked20. Differential Case AssemblyA: DISASSEMBLY1) Using a press and ST, remove the taper rollerbearing.ST 498077000 REMOVERG3M04882) Secure the case in a vise and remove thecrown gear tightening bolts, then separate thecrown gear, case (RH) and case (LH).S3M0490A(A) Crown gear(B) Differential case (RH)(C) Differential case (LH)3) Pull out the straight pin and shaft, and removethe differential bevel gear, washer, and differentialbevel pinion.S3M0491B: INSPECTIONCheck each component for harmful cuts, damageand other faults.1063-2 [W20A0] SERVICE PROCEDURE20. Differential Case Assembly