Subaru Forester AutomaticTransmission 1999 2000 (52) PDF

21. Transfer Clutch
A: DISASSEMBLY
1) Remove the seal ring.
CAUTION:
Be careful not to damage the seal ring.
S3M0493A
(A) Seal ring
2) Using a press and ST, remove the ball bearing.
CAUTION:
Do not reuse the bearing.
ST 498077600 REMOVER
S3M0494A
3) Remove the snap ring, and take out the pres-
sure plate, drive plates, and driven plates.
S3M0495
4) Remove the snap ring with ST1, ST2 and ST3,
and take out the return spring and transfer clutch
piston seal.
ST1 399893600 PLIERS
ST2 398673600 COMPRESSOR
ST3 398623600 SEAT
B3M1415B
5) Apply compressed air to the rear drive shaft to
remove the piston.
G3M0497
B: INSPECTION
1) Check the drive plate facing for wear and dam-
age.
2) Check the snap ring for wear, return spring for
permanent set and breakage, and return spring for
deformation.
3) Check the lathe cut ring for damage.
C: ASSEMBLY
1) Install the transfer clutch piston.
B3M1400
108
3-2 [W21A0] SERVICE PROCEDURE
21. Transfer Clutch

Subaru Forester AutomaticTransmission 1999 2000 (52) Summary of Content

21. Transfer ClutchA: DISASSEMBLY1) Remove the seal ring.CAUTION:Be careful not to damage the seal ring.S3M0493A(A) Seal ring2) Using a press and ST, remove the ball bearing.CAUTION:Do not reuse the bearing.ST 498077600 REMOVERS3M0494A3) Remove the snap ring, and take out the pres-sure plate, drive plates, and driven plates.S3M04954) Remove the snap ring with ST1, ST2 and ST3,and take out the return spring and transfer clutchpiston seal.ST1 399893600 PLIERSST2 398673600 COMPRESSORST3 398623600 SEATB3M1415B5) Apply compressed air to the rear drive shaft toremove the piston.G3M0497B: INSPECTION1) Check the drive plate facing for wear and dam-age.2) Check the snap ring for wear, return spring forpermanent set and breakage, and return spring fordeformation.3) Check the lathe cut ring for damage.C: ASSEMBLY1) Install the transfer clutch piston.B3M14001083-2 [W21A0] SERVICE PROCEDURE21. Transfer Clutch