Subaru Forester AWD System 1999 2000 (7) PDF

2. Rear Differential
A: ON-CAR SERVICE
1. FRONT OIL SEAL
1) Disconnect ground terminal from battery.
2) Move select lever or gear shift lever to ?N?.
3) Release the parking brake.
4) Remove oil drain plug, and drain gear oil.
B3M0316B
(A) Drain plug
(B) Filler plug
5) Jack-up rear wheels and support the vehicle
body with sturdy racks.
6) Remove propeller shaft from body. <Ref. to 3-4
[W1B0].>
S3M0028
7) Remove self-locking nut while holding compan-
ion flange with ST.
ST 498427200 FLANGE WRENCH
S3M0031A
8) Extract companion flange with a puller.
B3M1644B
9) Remove oil seal using ST.
ST 398527700 PULLER ASSY
S3M0032B
10) Fit a new oil seal using ST.
ST 498447120 OIL SEAL INSTALLER
G3M0037
11) Install companion flange.
13
[W2A1] 3-4SERVICE PROCEDURE
2. Rear Differential

Subaru Forester AWD System 1999 2000 (7) Summary of Content

2. Rear DifferentialA: ON-CAR SERVICE1. FRONT OIL SEAL1) Disconnect ground terminal from battery.2) Move select lever or gear shift lever to N.3) Release the parking brake.4) Remove oil drain plug, and drain gear oil.B3M0316B(A) Drain plug(B) Filler plug5) Jack-up rear wheels and support the vehiclebody with sturdy racks.6) Remove propeller shaft from body. Ref. to 3-4[W1B0].S3M00287) Remove self-locking nut while holding compan-ion flange with ST.ST 498427200 FLANGE WRENCHS3M0031A8) Extract companion flange with a puller.B3M1644B9) Remove oil seal using ST.ST 398527700 PULLER ASSYS3M0032B10) Fit a new oil seal using ST.ST 498447120 OIL SEAL INSTALLERG3M003711) Install companion flange.13[W2A1] 3-4SERVICE PROCEDURE2. Rear Differential