Subaru Forester Body Electrical System 1999 2000 (14) PDF

8. Combination Meter
A: REMOVAL AND INSTALLATION
1) Disconnect ground cable from battery.
2) Move steering wheel most down.
3) Remove screws which secure visor and
remove visor.
S6M0076A
4) Remove screws which secure combination
meter, and pull combination meter out.
S6M0077
5) Disconnect connector from top of combination
meter.
6) Install in the reverse order of removal.
CAUTION:
When installing the combination meter, be sure
to connect the connectors to the top of combi-
nation meter.
B: BULB REPLACEMENT
S6M0428B
(1) Check engine
(2) Oil pressure
(3) Charge
(4) AT oil temp.
(5) Brake
(6) Tachometer
(7) Turn RH
(8) HI-beam
(9) Turn LH
(10) Speedometer
(11) FWD
(12) Seat belt
(13) ABS
(14) Low fuel
(15) Speedometer and fuel gauge
(16) Odometer and trip meter
(17) Outside air temperature display
(18) Tachometer and temperature gauge
16
6-2 [W8A0] SERVICE PROCEDURE
8. Combination Meter

Subaru Forester Body Electrical System 1999 2000 (14) Summary of Content

8. Combination MeterA: REMOVAL AND INSTALLATION1) Disconnect ground cable from battery.2) Move steering wheel most down.3) Remove screws which secure visor andremove visor.S6M0076A4) Remove screws which secure combinationmeter, and pull combination meter out.S6M00775) Disconnect connector from top of combinationmeter.6) Install in the reverse order of removal.CAUTION:When installing the combination meter, be sureto connect the connectors to the top of combi-nation meter.B: BULB REPLACEMENTS6M0428B(1) Check engine(2) Oil pressure(3) Charge(4) AT oil temp.(5) Brake(6) Tachometer(7) Turn RH(8) HI-beam(9) Turn LH(10) Speedometer(11) FWD(12) Seat belt(13) ABS(14) Low fuel(15) Speedometer and fuel gauge(16) Odometer and trip meter(17) Outside air temperature display(18) Tachometer and temperature gauge166-2 [W8A0] SERVICE PROCEDURE8. Combination Meter