Subaru Forester Body Electrical System 1999 2000 (19) PDF

2) Remove front pillar lower trim.
S6M0097
3) Disconnect connector from cruise control mod-
ule.
4) Remove bolt, then remove cruise control mod-
ule.
S6M0098
5) Install in the reverse order of removal.
5. STOP AND BRAKE SWITCH
1) Disconnect ground cable from battery.
2) Disconnect connector from switch, then remove
the switch. <Ref. to 4-5 [C100].>
3) Install in the reverse order of removal.
6. CLUTCH SWITCH
1) Disconnect ground cable from battery.
2) Disconnect connector from switch, then remove
the switch. <Ref. to 4-5 [C100].>
3) Install in the reverse order of removal.
13. Front Fog Light
A: REMOVAL AND INSTALLATION
1) Disconnect ground cable from battery.
2) Remove the two screws, then draw out the front
fog light from front bumper.
S6M0085
3) Disconnect the connector.
4) Install in the reverse order of removal.
22
6-2 [W12B5] SERVICE PROCEDURE
13. Front Fog Light

Subaru Forester Body Electrical System 1999 2000 (19) Summary of Content

2) Remove front pillar lower trim.S6M00973) Disconnect connector from cruise control mod-ule.4) Remove bolt, then remove cruise control mod-ule.S6M00985) Install in the reverse order of removal.5. STOP AND BRAKE SWITCH1) Disconnect ground cable from battery.2) Disconnect connector from switch, then removethe switch. Ref. to 4-5 [C100].3) Install in the reverse order of removal.6. CLUTCH SWITCH1) Disconnect ground cable from battery.2) Disconnect connector from switch, then removethe switch. Ref. to 4-5 [C100].3) Install in the reverse order of removal.13. Front Fog LightA: REMOVAL AND INSTALLATION1) Disconnect ground cable from battery.2) Remove the two screws, then draw out the frontfog light from front bumper.S6M00853) Disconnect the connector.4) Install in the reverse order of removal.226-2 [W12B5] SERVICE PROCEDURE13. Front Fog Light