Subaru Forester Body Electrical System 1999 2000 (20) PDF

14. Security System
A: REMOVAL AND INSTALLATION
1. SECURITY CONTROL MODULE
1) Disconnect battery ground cable.
2) Remove shift knob (MT model).
3) Remove console cover (A) and front cover (B)
while disconnecting connector.
S5M0042A
4) Disconnect connector from security control
module.
5) Remove bolt (A) and loosen bolt (B).
NOTE:
Loosen bolt (B) without completely removing it.
S6M0482A
6) Remove security control module.
7) Install in the reverse order of removal.
NOTE:
To install the security control module, tighten bolts
securely so that the bolts do not come loose.
B: INSPECTION
1. IMPACT SENSOR
Perform impact sensitivity test.
<Ref. to 6-2 [T5F1].>
23
[W14B1] 6-2SERVICE PROCEDURE
14. Security System

Subaru Forester Body Electrical System 1999 2000 (20) Summary of Content

14. Security SystemA: REMOVAL AND INSTALLATION1. SECURITY CONTROL MODULE1) Disconnect battery ground cable.2) Remove shift knob (MT model).3) Remove console cover (A) and front cover (B)while disconnecting connector.S5M0042A4) Disconnect connector from security controlmodule.5) Remove bolt (A) and loosen bolt (B).NOTE:Loosen bolt (B) without completely removing it.S6M0482A6) Remove security control module.7) Install in the reverse order of removal.NOTE:To install the security control module, tighten boltssecurely so that the bolts do not come loose.B: INSPECTION1. IMPACT SENSORPerform impact sensitivity test.Ref. to 6-2 [T5F1].23[W14B1] 6-2SERVICE PROCEDURE14. Security System