Subaru Forester Brakes 1999 2000 (32) PDF

13. ABS Sensor
A: REMOVAL
1. FRONT ABS SENSOR
1) Disconnect front ABS sensor connector located
in engine compartment.
2) Remove bolts which secure sensor harness to
strut.
B4M1442C
(1) Sensor harness
3) Remove bolts which secure sensor harness to
body.
B4M1728B
(1) To front ABS sensor connector
(2) Bracket
4) Remove bolts which secure frontABS sensor to
housing, and remove front ABS sensor.
CAUTION:
Be careful not to damage pole piece located
at tip of the sensor and teeth faces during
removal.
Do not pull sensor harness during removal.
B4M2209B
(1) Front ABS sensor
5) Remove front disc brake caliper and disc rotor
from housing after removing front tire.
6) Remove front drive shaft and housing and hub
assembly. <Ref. to 4-2 [W1A0].>
2. REAR ABS SENSOR
1) Remove rear seat and disconnect rear ABS
sensor connector.
2) Remove rear sensor harness bracket from rear
trailing link and bracket.
3) Remove rear ABS sensor from rear back plate.
B4M1182B
(1) Rear ABS sensor
4) Remove rear tone wheel while removing hub
from housing and hub assembly. <Ref. to 4-2
[W2A0].>
CAUTION:
Be careful not to damage pole piece located
at tip of the sensor and teeth faces during
removal.
Do not pull sensor harness during removal.
46
4-4 [W13A1] SERVICE PROCEDURE
13. ABS Sensor