Subaru Forester Brakes 1999 2000 (35) PDF

15C3 : CHECK G SENSOR.
Read the select monitor display.
H4M1327A
:
Is the indicated reading 0.7
0.2 V
when G sensor is inclined backwards
to 90?
: G sensor is normal.
: Replace G sensor.
16. Brake Pipe
A: SUPPLEMENTAL RESTRAINT
SYSTEM ?AIRBAG?
Airbag system wiring harness is routed near the
center brake pipe.
CAUTION:
All airbag system wiring harness and con-
nectors are yellow. Do not use electrical test
equipment on these circuit.
Be careful not to damage airbag system wir-
ing harness when servicing the center brake
pipe.
B: REMOVAL AND INSTALLATION
CAUTION:
When removing and installing the brake
pipe, make sure that it is not bent.
After installing the brake pipe and hose,
bleed the air.
After installing the brake hose, make sure
that it does not touch the tire or suspension
assembly, etc.
Brake pipe tightening torque:
15
+3
/
?2
Nm (1.5
+0.3
/
?0.2
kg-m, 10.8
+2.2
/
?1.4
ft-lb)
57
[W16B0] 4-4SERVICE PROCEDURE
16. Brake Pipe

Subaru Forester Brakes 1999 2000 (35) Summary of Content

15C3 : CHECK G SENSOR.Read the select monitor display.H4M1327A:Is the indicated reading 0.70.2 Vwhen G sensor is inclined backwardsto 90?: G sensor is normal.: Replace G sensor.16. Brake PipeA: SUPPLEMENTAL RESTRAINTSYSTEM AIRBAGAirbag system wiring harness is routed near thecenter brake pipe.CAUTION: All airbag system wiring harness and con-nectors are yellow. Do not use electrical testequipment on these circuit. Be careful not to damage airbag system wir-ing harness when servicing the center brakepipe.B: REMOVAL AND INSTALLATIONCAUTION: When removing and installing the brakepipe, make sure that it is not bent. After installing the brake pipe and hose,bleed the air. After installing the brake hose, make surethat it does not touch the tire or suspensionassembly, etc.Brake pipe tightening torque:15+3/2Nm (1.5+0.3/0.2kg-m, 10.8+2.2/1.4ft-lb)57[W16B0] 4-4SERVICE PROCEDURE16. Brake Pipe