Subaru Forester clutch 1999 2000 (8) PDF

5. Operating Cylinder
A: REMOVAL AND INSTALLATION
1) Remove air cleaner case.
S2M0913
2) Remove clutch hose from operating cylinder.
CAUTION:
Cover hose joint to prevent clutch fluid from
flowing out.
B2M1179J
(A) Clutch hose
(B) Operating cylinder
3) Remove operating cylinder from transmission.
B2M1263
4) Install in the reverse order of removal.
NOTE:
Before installing operating cylinder, apply grease
(SUNLIGHT 2: P/N 003602010) to contact point of
clutch release lever and operating cylinder.
Tightening torque:
T1: 18
3 Nm (1.8
0.3 kg-m, 13.0
2.2 ft-lb)
T2: 37
3 Nm (3.8
0.3 kg-m, 27.5
2.2 ft-lb)
B2M1179C
5) After bleeding air from operating cylinder,
ensure that clutch operates properly.
<Ref. to 2-10 [W2A0].>
12
2-10 [W5A0] SERVICE PROCEDURE
5. Operating Cylinder

Subaru Forester clutch 1999 2000 (8) Summary of Content

5. Operating CylinderA: REMOVAL AND INSTALLATION1) Remove air cleaner case.S2M09132) Remove clutch hose from operating cylinder.CAUTION:Cover hose joint to prevent clutch fluid fromflowing out.B2M1179J(A) Clutch hose(B) Operating cylinder3) Remove operating cylinder from transmission.B2M12634) Install in the reverse order of removal.NOTE:Before installing operating cylinder, apply grease(SUNLIGHT 2: P/N 003602010) to contact point ofclutch release lever and operating cylinder.Tightening torque:T1: 183 Nm (1.80.3 kg-m, 13.02.2 ft-lb)T2: 373 Nm (3.80.3 kg-m, 27.52.2 ft-lb)B2M1179C5) After bleeding air from operating cylinder,ensure that clutch operates properly.Ref. to 2-10 [W2A0].122-10 [W5A0] SERVICE PROCEDURE5. Operating Cylinder