Subaru Forester Emission Control System and Vacuum Fitting 1999 2000 (10) PDF

8) Installation is in the reverse order of removal.
Do the following:
(1) Install fuel sub level sensor.
Tightening torque:
T: 4.4
1.5 Nm (0.45
0.15 kg-m, 3.3
1.1
ft-lb)
S2M0152B
(2) Connect connector to fuel pump relay.
S2M0093
11. Vent Valve
A: REMOVAL AND INSTALLATION
1) Remove fuel tank. <Ref. to 2-8 [W2A0].>
S2M0169
2) Remove protector cover.
H2M3601
3) Move clips, and disconnect hoses from vent
valve.
H2M3606
4) Remove nuts which install vent valve on fuel
tank.
H2M3607
15
[W11A0] 2-1SERVICE PROCEDURE
11. Vent Valve

Subaru Forester Emission Control System and Vacuum Fitting 1999 2000 (10) Summary of Content

8) Installation is in the reverse order of removal.Do the following:(1) Install fuel sub level sensor.Tightening torque:T: 4.41.5 Nm (0.450.15 kg-m, 3.31.1ft-lb)S2M0152B(2) Connect connector to fuel pump relay.S2M009311. Vent ValveA: REMOVAL AND INSTALLATION1) Remove fuel tank. Ref. to 2-8 [W2A0].S2M01692) Remove protector cover.H2M36013) Move clips, and disconnect hoses from ventvalve.H2M36064) Remove nuts which install vent valve on fueltank.H2M360715[W11A0] 2-1SERVICE PROCEDURE11. Vent Valve